We never sell your data to third parties
IPTCI UCTRS 203 17MM Take-Up Unit Set Screw mounted ball bearing unit with 17mm bore. Narrow slot take-up frame with set screw locking. Wide inner race insert. Standard lip seal. Suitable for conveyor belt tensioning and light-to-medium duty shafting applications.
MODEL UCTRS 203 17MM
Contact supplier for technical support on: 704 588 1091
$37.29 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bi
31.0
k
6.4
W
89
Take up units with set screw lock.
- Standard duty
- Narrow slot
- Cast iron housing
- Wide inner race bearing
- B-type seals
Unit Number: UCTRS 203
| I | C | P | S | B | k | E | A | W | L | F | H | Bi | N | M |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 7/8 | 7/16 | 1 3/8 | 3/4 | 1 1/2 | 1/4 | 2 5/8 | 3 1/8 | 3 1/2 | 3/4 | 5/16 | 2 3/16 | 1.2205 | 0.5000 | 0.7205 |
Dimensions are in Inches.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreSKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | NSK Bearings |
| Model | NN3034MBKRE1CC1P4 |
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreSKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read more