We never sell your data to third parties
IPTCI UCFLX7-23 2-Bolt Flange Set Screw mounted ball bearing unit with 1-7/16" bore. Standard lip seal. Cast iron housing. Suitable for standard industrial shafting applications.
MODEL UCFLX7-23
Contact supplier for technical support on: 704 588 1091
$31.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
A
6 7/8
B
3 15/16
Bolt Used
7/16
Cast iron housing
Yes
E
5 21/32
G
9/16
I
53/64
L
1 13/32
Medium duty
Yes
S
33/64
Unit Number
UCFL X07-23UCFL X07-23
Z
2
2-Bolt flange units with set screw lock.
- Medium duty
- Cast iron housing
- Wide inner race with greater load carrying capacity than standard duty
- B-type seals
Unit Number: UCFL X07-23UCFL X07-23
| A | E | I | G | L | S | B | Z | Bi | N | M | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 7/8 | 5 21/32 | 53/64 | 9/16 | 1 13/32 | 33/64 | 3 15/16 | 2 | 1.9370 | 0.7480 | 1.1890 | 7/16 |
Dimensions are in Inches.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | SKF Bearing |
| Model | GEM 35 ES-2RS |
| Brand | Bunting Bearings |
| Model | NT101801 |
| Brand | Consolidated Bearings |
| Model | 22260E-KM C/3 CBC |
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more