We never sell your data to third parties
IPTCI SUCTFB 204 20MM Insert Only Set Screw mounted ball bearing unit with 20mm bore. Stainless steel insert with standard lip seal. Suitable for use with 3-bolt flange bracket housings in light-duty applications.
MODEL SUCTFB 204 20MM
This product has a minimum order quantity of (2 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 704 588 1091
$91.83 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(2 minimum)
Typically Ships in: 1 day
Returnable: See conditions
Bi
31.0
Bolt Used
5/16
W
108
Z
33.3
Thermoplastic 3-bolt flanges with set screw lock.
- Stainless Steel bearing insert
- End caps available
- B-type seals
- L3-type seals available in some sizes Consult IPTCI for speed limitations
Unit Number: SUCTFB 204SUCTFB 204
| W | B | D | L | S | G | H | J | E | I | Z | Bi | N | M | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4 1/4 | 2 1/2 | 2 7/16 | 1 1/32 | 25/64 | 7/16 | 1 11/16 | 7/8 | 1 1/2 | 19/32 | 1 5/16 | 1.2205 | 0.5000 | 0.7205 | 5/16 |
Dimensions are in Inches.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
