We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
IPTCI SUCTFB207-20 Insert Only Set Screw mounted ball bearing unit with 1-1/4" bore. Stainless steel insert with standard lip seal. Suitable for use with 3-bolt flange bracket housing in light-duty applications.
MODEL SUCTFB 207 20
Contact supplier for technical support on: 704 588 1091
$138.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
B
3 3/4
Bolt Used
7/16
D
3 1/2
E
2
G
41/64
H
2 3/8
I
3/4
J
1 1/4
L
1 7/16
S
33/64
Stainless Steel bearing insert
Yes
Stainless Steel bearing insert End caps available
Yes
Unit Number
SUCTFB 207-20SUCTFB 207-20
W
6 1/8
Z
1 49/64
Thermoplastic 3-bolt flanges with set screw lock.
- Stainless Steel bearing insert
- End caps available
- B-type seals
- L3-type seals available in some sizes Consult IPTCI for speed limitations
Unit Number: SUCTFB 207-20SUCTFB 207-20
| W | B | D | L | S | G | H | J | E | I | Z | Bi | N | M | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 1/8 | 3 3/4 | 3 1/2 | 1 7/16 | 33/64 | 41/64 | 2 3/8 | 1 1/4 | 2 | 3/4 | 1 49/64 | 1.6890 | 0.6890 | 1.0000 | 7/16 |
Dimensions are in Inches.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 1152957
Worked, 7/16" bolt holes though.
For some reason I was expecting this to have 1/2" bolt holes for mounting it. They are 7/16". It still worked for my application though.
Read more