We never sell your data to third parties
IPTCI CUCTF208-40MM 4-Bolt Flange Set Screw mounted ball bearing unit with 40mm bore. Hard chrome coated insert with thermoplastic housing. Standard lip seal. Suitable for washdown and corrosive environments requiring a non-metallic housing.
MODEL CUCTF 208 40MM
Contact supplier for technical support on: 704 588 1091
$104.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
a
130
Bi
49.2
Bolt Used
1/2
e
102
g
17
l
37
Z
53.2
Thermoplastic 4-bolt flanges with set screw lock.
- Hard Chrome Coated bearing insert
- End caps available
- B-type seals
Unit Number: CUCTF 208
| a | e | i | g | l | S | Z | Bi | N | M | Bolt Used |
|---|---|---|---|---|---|---|---|---|---|---|
| 5 1/8 | 4 | 29/32 | 21/32 | 1 15/32 | 35/64 | 2 3/32 | 1.9370 | 0.7480 | 1.1890 | 1/2 |
Dimensions are in Inches.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | NTN Bearing |
| Model | SUCTBL207-22CCFG1 |
| Brand | Harwal |
| Model | .375 x 1.625 x .250B |