We never sell your data to third parties
Dodge 078357 P2B-GT-015-LLS Two-Bolt Pillow Block Ball Bearing with 15/16" bore, Grip Tight adapter mount locking, cast iron housing, non-expansion (fixed) configuration, and low torque labyrinth seal for reduced friction applications. 15/16" bore Pillow Block 2-Bolt Ball Bearing with Grip Tight locking used in General Purpose applications
MODEL P2B-GT-015-LLS
Contact supplier for technical support on: +1-864-284-5700
$145.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt to bolt max
3.6900 in, 93.726 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
15/16 in
Bore Diameter
15/16"
Bore length
1.4600 in, 37.084 mm
Duty
Standard Duty
Duty Rating
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-Expansion (Fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing Material
Cast Iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
Housing Type
Two-Bolt Pillow Block (P2B)
I.D.
15/16
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Grip tight
Lubrication type
Grease
Relubrication
Yes
Rolling Element
Ball Bearing
Seal option
Low torque labyrinth seal
Seal type
Labyrinth
Sensor ready
Adapter required
Shaft attachment
Push-pull adapter
Shaft diameter
0.9375 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Irwin Tools |
| Model | 93359 |
| Brand | Fibox |
| Model | CLI ARCA 455E |
| Brand | Wiegmann |
| Model | WADRSWCO |
| Brand | Wiegmann |
| Model | SCF4848 |
| Brand | MRO Supply |
| Model | 1NVU5 |
| Brand | Wiegmann |
| Model | SC3030 |
| Brand | Wiegmann |
| Model | SCF3030 |
SKU: 5005293
Dodge conveyor bushings
The right part, in stock, easy to find, quickly shipped.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/