We never sell your data to third parties
Dodge 079257 P2B-SXRBED-215S two-bolt pillow block ball bearing with 2-15/16" bore (74.612mm), eccentric collar locking, QuadGuard seals, cast iron housing, 215 series, non-expansion (fixed) configuration for industrial applications. 2-15/16" bore Pillow Block 2-Bolt Ball Bearing with Eccentric Locking locking used in Dirty & Dusty Environment applications
MODEL P2B-SXRBED-215S
Contact supplier for technical support on: +1-864-284-5700
$434.66 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
215 series
Base to center height
3.3100 in, 84.074 mm
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 15/16 in
Bore length
3.0200 in, 76.708 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 15/16
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Eccentric locking
Lubrication type
Grease
Max Speed
1750 RPM
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Quadruple-Lip Contact
Sensor ready
Adapter required
Shaft attachment
Eccentric collar
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-350
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block, cast iron construction
- Bore Diameter: 2-15/16" (74.612mm)
- Locking Mechanism: Eccentric collar, quarter-turn locking in shaft rotation direction
- Bearing Series: 215 series ball bearing
- Duty Rating: Standard duty for general industrial applications
- Seal Protection: QuadGuard seals with flingers for enhanced contamination protection
- Configuration: Non-expansion (fixed) bearing for shaft positioning
- Maximum Speed: 1750 RPM rated
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#126852
Brand
Dodge
Model
INS-SC-207
#2217990
Brand
Dodge
Model
P2B-SXRBED-215S
#792254
Brand
Dodge
Model
TS-350X9-TUFR
#2247199
Brand
Dodge
Model
127333
#2247198
Brand
Dodge
Model
127332
| Brand | Cle-Line |
| Model | C30187 |
| Brand | Eklind |
| Model | 51612 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/