We never sell your data to third parties
Dodge 079847 P2B-VSC-100-LL MODS two-bolt pillow block ball bearing unit. 1" bore, 65° set screw locking, intermediate duty rating, cast iron housing, 205 series. Low torque labyrinth seal for reduced friction. Non-expansion fixed configuration. 1" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in General Purpose applications
MODEL P2B-VSC-100-LL MODS
Contact supplier for technical support on: +1-864-284-5700
$85.69 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
General Purpose
Ball bearing series
205 series
Base to center height
1.4400 in, 36.576 mm
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
4.5000 in, 114.3 mm
Bolt to bolt min
3.6900 in, 93.726 mm
Bore
1 in
Bore length
1.3400 in, 34.036 mm
Duty
Intermediate duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
1 1/5
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Relubrication
Yes
Seal option
Low torque labyrinth seal
Seal type
Labyrinth
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
1.0000 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-10, TS-100
Type
Pillow block 2-Bolt
- Housing Configuration: Two-bolt pillow block with cast iron construction
- Bore Diameter: 1" (25.4mm) with 205 series bearing insert
- Locking Mechanism: 65° set screw for maximum holding power
- Duty Rating: Intermediate duty with ProGuard lip seal system
- Seal Technology: Low torque labyrinth seal reduces friction and power consumption
- Expansion Type: Non-expansion (fixed) configuration for shaft positioning
- Rolling Element: Ball bearing design for general purpose applications
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#133287
Brand
Dodge
Model
069640
#780956
Brand
Dodge
Model
066631
#133376
Brand
Dodge
Model
069437
#133348
Brand
Dodge
Model
FC-IP-200RE
#133559
Brand
Dodge
Model
071126
| Brand | Thomson Linear |
| Model | HD24B100-0100LLX2MES |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-461401 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/