We never sell your data to third parties
McGill CFH 7/8 CAMROL heavy stud cam follower with 7/8 in cylindrical roller diameter, heavy stud construction, and screwdriver slot drive. Built from 52100 bearing steel with black oxide finish. Used in cam mechanisms and packaging machinery.
MODEL CFH 7/8
This product has a minimum order quantity of (100 minimum) This is the minimum order quantity available when purchasing this product.
Contact supplier for technical support on: 800-626-2120
$26.64 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity(100 minimum)
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Adjustment
None
Clamping Torque (in-lbf)
250
Dynamic Load Rating (lb)
1660
Height
1.75
Hex/Slot
Screwdriver Slot
Length
1.75
Lubrication Fitting Size (in)
3/16
Stud Diameter (in)
0.4375
Stud Length (in)
0.875
Threads
7/16-20
Tolerance Class
P0 Equivalent
Regal Beloit Mcgill&Reg; CFH 7/8
UPC: 726166032807 | UNSPSC: 26101708 | GTIN:
Bearings > Cam Follower & Yoke Rollers > Crowned/Flat Follower & Track Runners
McGill CAMROL Cam Follower, Cylindrical OD, Series: CFH, 7/8 in Roller Diameter, 1/2 in Roller Width, 7/16 in Stud Diameter, 7/8 in Stud Length, 7/16-20 UNF Thread, 3/8 in Thread Length, 1660 lb Dynamic/2100 lb Static Load, 5400 rpm Maximum, -20 to 250 deg F, Heavy Stud, Sealed Closure, Hex Head, Chrome Steel Roller, 52100 Steel Stud, Black Oxide
Features:
- Full complement needle roller construction provides high radial load capacity, it also provides improved resistance to shock loading versus caged needle bearing
- It provides improved resistance to shock loading versus caged needle bearing
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- Inner studs are induction heat treated in the roller path and flange surfaces
- Our sealed bearing option helps extend bearing life by utilizing a lubrication groove and LUBRI-DISC seals
- Bearings are supplied pre-lubricated with lithium soap thickened grease
- The annular groove in the outer raceway provides a lubrication reservoir which increases the pre-lubricated life of the bearing
- The threads are manufactured to a class 2 tolerance
Specs:
| Stud Material | 52100 Steel |
|---|---|
| Stud Type | Heavy |
| Stud Diameter | 7/16 in |
| Stud Length | 7/8 in |
| Roller Material | Chrome Steel |
| Roller Width | 1/2 in |
| Roller Diameter | 7/8 in |
| Thread Length | 3/8 in |
| Head Type | Hex |
| Temperature Rating | -20 to 250 deg F |
| Load Capacity | 1660 lb Dynamic/2100 lb Static |
| Closure Type | Sealed |
| Thread Size | 7/16-20 UNF |
| Finish | Black Oxide |
| Maximum Speed | 5400 rpm |
| Type | Cylindrical OD |
| Series | CFH |
Packaging:
| Length | 1.75 in |
|---|---|
| Width | 1.0 in |
| Height | 1.75 in |
Certifications/Standards:
ABMA Standard
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#2490037
Brand
Carter
Model
CNBH-28
| Brand | McGill Bearing |
| Model | MCFRE 19 SBX |