We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt MSG219NLPA 10416947 MSG200 medium duty mounted ball bearing insert with 1-3/16" bore and set screw locking. Features a 52100 bearing steel insert, nylon retainer, and Buna triple lip seal. Static load rating 3440 lbf, dynamic load rating 5810 lbf. Maximum speed 6850 RPM.
MODEL 10416947
Contact supplier for technical support on: 800-626-2120
$77.62 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
N Lip Seal; E1 Viton Seal; FF Free Running; HFF Free Running; MHFF Free Running
Bearing Type
Medium duty
Bore length (in)
1 9/16 in
Bore size (in)
1.1875 in
Bore size (mm)
30.1625 mm
C dynamic load rating
5810 lb
Co static load rating
3440 lb
Distance from Bearing Centerline to Centerline of Lube Hole (in)
0.227 in
Distance from Inner Ring Long Hub Face to Centerline of Setscrew (in)
0.34 in
Height
2.00
Inner ring hub diameter (in)
1.847 in
Length
3.00
Locking Type
Set screw
Lubrication type
EXXON RONEX MP STD
Maximum Speed (RPM)
6850 rpm
Maximum Temperature (C)
107 C
Maximum Temperature (F)
225 F
Mounted clearance
C3 standard
Outer Ring Width (in)
0.7480 in
Outside diameter (in)
2.8346 in
Primary seal
BUNA TRIPLE LIP SEAL NARROW
Retainer type
Nylon
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
165-185 in/lbs
Short Hub Length (in)
0.454 in
Size code
207
Thread
5/16-24 in
Type of seal
Single lip contact seal
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0383 cps
Volume
0.078
Volume unit
GLL
Width
3.00
1 3/16" Unmounted Ball Bearing, Medium Duty, Setscrew Locking, Single Lip Contact Seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Rexnord |
| Model | 114-4741-20 |
| Brand | U.S.Tsubaki |
| Model | H50B17F-1G |