We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
System Plast UCFQ207-23-SS-NC is a mounted four-bolt flange ball bearing with a 1.4375" bore, Nolu-Clean polyamide housing, and a 400 series stainless steel insert. It features a setscrew lock and single lip contact seal, designed for washdown and food-grade conveyor applications in packaging and bottling lines.
MODEL 70207CG/SS-EC
Contact supplier for technical support on: 800-626-2120
$224.13 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Bearing Type
Standard Duty
Bolt Size
M12
Bolt Size (in)
1/2
Bolt Spacing (in)
3.625
Bore Geometry
Straight
Bore Size (in)
1.438
Cage Material
Stainless Steel
Cage Type
Ball Riding Retainer
Dynamic Load Rating (lb)
3305
End Cap Available
Yes
Fixed vs. Expansion
Fixed
Foot Height (in)
0.63
Grease Fitting Thread Size
M6X1
Height
1.71
Housing
Nolu-Clean
Housing Color
White
Housing Construction
One Piece
Housing Style
Flange Block
Housing Type
Flange, Four Bolt
Inner Ring O.D. (in)
1.844
Insert
SS-SB207-23 RG
Insert Material
400 Series Stainless Steel
Length
4.65
Length Through Bore (in)
1.25
Locking
Setscrew
Lubricant
NSF H1 Food Grade Grease
Max Operating Temperature (F)
180
Maximum Speed (RPM)
2600
Measure Units
Inch
Misalignment Capability
±1.0° Misalignment - Static Only
Misalignment Type
Static Only
Outer Ring Land Profile
Standard
Overall Height (in)
1.719
Overall Length (in)
4.63
Overall Width (in)
4.63
Pilot Configuration
No Pilot
Radial Clearance
Standard
Rolling Element
Ball Bearing
Seal Type
Single Lip Contact Seal
Setscrew Torque (in-lbs)
100
Size Code
207
Static Load (lbs)
2563
Width
4.65
Specifications
| Product | System Plast - Four Bolt Flange - 400 Series Stainless Steel |
|---|---|
| Shaft Size (In) | 1 7/16 |
| Rolling Element | Ball |
| Locking Device | Setscrew |
| Bearing Seal | Single Lip Contact |
| Duty Series | Standard |
| Housing Base | Solid |
| Sale Qty Multiple: | 1 |
| No. Links/Ft. : | 0 |
| Product: | System Plast - Four Bolt Flange - 400 Series Stainless Steel |
| Shaft Size (In): | 1 7/16 |
| Rolling Element: | Ball |
| Locking Device: | Setscrew |
| Bearing Seal: | Single Lip Contact |
| Duty Series: | Standard |
| Housing Base: | Solid |
| Housing Material: | Nolu-Clean |
| Expansion: | No |
| Maximum Operating Temperature: | 180 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.