We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
System Plast UCP204-20M-SS-NC-OEC mounted two-bolt pillow block ball bearing with 20 mm bore, Nolu-Clean polyamide housing, and 400 series stainless steel insert. Features setscrew lock and single lip contact seal with open end cover. Designed for washdown and food-grade conveyor applications under the Regal Rexnord brand.
MODEL 58204CGR/SS
Contact supplier for technical support on: 800-626-2120
$160.86 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ability to Relubricate
Yes
Base Length (in)
5
Base to Center Height (in)
1.313
Base Width (in)
1.22
Bearing Insert Material
400 Series Stainless Steel
Bearing Type
Standard Duty
Bolt Size
M10
Bolt Spacing Max (in)
4.17
Bolt Spacing Min (in)
3.58
Bore Geometry
Straight
Bore Size (mm)
20
Cage Material
Stainless Steel
Cage Type
Ball Riding Retainer
Centerline to Outermost Bearing Face (in)
0.719
Dynamic Load Rating (lb)
1641
End Cap Available
Yes
Fixed vs. Expansion
Fixed
Foot Height (in)
0.63
Grease Fitting Thread Size
M6
Height
2.64
Housing
Nolu-Clean
Housing Base
Solid
Housing Color
White
Housing Construction
One Piece
Housing Style
Pillow Block
Housing Type
Pillow Block, Two Bolt
Inner Ring O.D. (in)
1.125
Insert
SS-SB204-20M RG
Length
5
Length Through Bore (in)
1.016
Locking
Set Screw
Lubricant
NSF H1 Food Grade Grease
Max Operating Temperature (F)
180
Maximum Speed (RPM)
4200
Misalignment Capability
±1.0° Misalignment - Static Only
Misalignment Type
Static Only
Outer Ring Land Profile
Standard
Overall Height (in)
2.64
Overall Length (in)
5
Overall Width (in)
1.22
Radial Clearance
Standard
Rolling Element
Ball Bearing
Seal Type
Single Lip Contact Seal
Setscrew Torque (in-lbs)
50
Size Code
204
Static Load (lbs)
1102
Width
2.07
Specifications
| Product | System Plast - Two Bolt Pillow Block - 400 Series Stainless Steel |
|---|---|
| Shaft Size (In) | 20 |
| Rolling Element | Ball |
| Locking Device | Setscrew |
| Bearing Seal | Single Lip Contact |
| Duty Series | Standard |
| Housing Base | Solid |
| Sale Qty Multiple: | 1 |
| No. Links/Ft.: | 0 |
| Product: | System Plast - Two Bolt Pillow Block - 400 Series Stainless Steel |
| Shaft Size (In): | 20 |
| Rolling Element: | Ball |
| Locking Device: | Setscrew |
| Bearing Seal: | Single Lip Contact |
| Duty Series: | Standard |
| Housing Base: | Solid |
| Housing Material: | Nolu-Clean |
| Expansion: | No |
| Maximum Operating Temperature: | 180 |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
