We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Carter CSCE-28-SB .875" Needle Cam Follower Stainless Steel, Crown, Eccentric, Sealed, Hex Stainless Steel, Crown, Eccentric, Sealed, Hex
MODEL CSCE-28-SB
Contact supplier for technical support on: 616 842 8760
$127.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Basic dynamic rating (lbf)
1490
Bushing diameter
0.500
Bushing length
0.500
Crown radius
10
Eccentric offset
0.015
Limiting speed (RPM)
5400
Lube fitting size
3/16
Max static capacity (lbf)
1500
Min boss diameter
1/2
Mounting bore diameter
0.503
Oil hole center
1/4
Oil hole diameter
3/32
Recom torque (in/pound)
47.5
Roller O.D.
0.875
Roller width
0.500
Stud length
0.875
Stud Length
0.875
Thread class 2A
3/8-24
Thread Length
3/8
Xtenda™ Stainless Steel Cam Followers and Cam Yoke Rollers
Carter's Xtenda™ series stainless steel needle bearings are available in both standard and custom sizes. You can order cam followers from stock in sizes 1/2" through 2-1/2" and cam yoke rollers from 3/4" through 2-1/2".
All standard Xtenda™ Series bearings are dimensionally interchangeable with standard cam followers and cam yoke rollers offered by other major manufacturers. Carter bearings offer many advantages over other bearings. Carter's Seal Tight solution minimizes contamination to keep your machinery running longer. Food-grade lubricant in used in Xtenda™ Series bearings to ensure compatibility with any application, with other lubricants available upon request. Carter's high precision manufacturing produces a bearing that can minimize expensive shutdowns due to bearing failure.
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Carter |
| Model | NYR-40 |
| Brand | Carter |
| Model | CNBE-60-SB |
| Brand | Carter |
| Model | FHR-112-A |
| Brand | Kipp |
| Model | K0179.1408X35 |
| Brand | System Plast |
| Model | 2256-10R30M-DMS |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may applied to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/