We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN UELFLU-1.5/8 is an Ultra-Class two-bolt rhombus flanged unit with a 1-5/8 inch bore and eccentric collar lock. The cast iron housing provides durability for industrial applications such as conveyors and fans.
MODEL UELFLU-1.5/8
$153.26 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.5625
A0
2.3125 in
A1
0.7188 in
A2
0.9375 in
B1
2.2165 in
Bearing Number
A-UEL209-110D1
Bearing number
A-UEL209-110D1
Bearing Type
Ball Bearing
d (in)
1 5/8
Dynamic Load Rating
7300 lbf
Dynamic load rating
7300 lbf
E (in)
5.8438
End Type
Open
End type
Open
F (in)
0.1929
Finish/Coating
Black oxide
H (in)
7.0938
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Material
Cast Iron
Housing material
Cast iron
Housing Number
FLU209D1V50
I.D.
1.625 in
L (in)
4.3750
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Max Rotational Speed
3500 RPM
Max Tightening Torque
138 lb·in
N (in)
0.5156
O.D.
3.3465 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
0.8425 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
4600 lbf
Static load rating
4600 lbf
Type
2-Bolt Rhombus Flanged Unit
Width
2.2165 in
Technical Specifications
Type | 2-Bolt Rhombus Flanged Unit |
|---|---|
Bearing Type | Ball Bearing |
Locking Device | Eccentric Locking Collar |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Bearing Number | A-UEL209-110D1 |
Housing Number | FLU209D1V50 |
Housing Material | Cast Iron |
Housing Construction | 1 Piece |
End Type | Open |
Finish/Coating | Black Oxide |
Performance | Light Duty |
Dynamic Load Rating | 7300 lbf32500 N32.50 kN |
Static Load Rating | 4600 lbf20400 N20.40 kN |
Rotational Speed [Max] | 3500 RPM |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.625 in41.275 mm |
|---|---|
H | 7.0938 in180.2 mm |
E | 5.8438 in148.4 mm |
L | 4.3750 in111.1 mm |
A | 1.5625 in39.7 mm |
A0 | 2.3125 in58.700 mm |
A1 | 0.7188 in18.3 mm |
A2 | 0.9375 in23.8 mm |
N | 0.5156 in13.1 mm |
B1 | 2.2165 in56.300 mm |
S | 0.8425 in21.400 mm |
F | 0.1929 in4.900 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#133658
Brand
Dodge
Model
F2B-SXR-110
#2271977
Brand
Browning
Model
767663
