We never sell your data to third parties
NTN UCPX09-112D1 heavy-duty 2-bolt pillow block bearing with 1-3/4 in bore and set screw locking. Cast iron housing provides robust support for industrial shaft applications. Pre-lubricated insert for general machinery, conveyors, and fan drives.
MODEL UCPX09-112D1
$129.77 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
2.6250
B (in)
2.0315
Bearing Number
UCX09-112D1
Bearing number
UCX09-112D1
Bearing Type
Ball Bearing
d (in)
1.7500
Dynamic Load Rating
7850 lbf
Dynamic load rating
7850 lbf
End Type
Open
End type
Open
F (in)
0.2323
H (in)
2.3125
H1
1.0313 in
H2
4.5625 in
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Material
Cast Iron
Housing material
Cast iron
Housing Number
PX09D1
I.D.
1.75 in
J (in)
6.1562
L (in)
8.7500
L1
2.5625 in
Locking Device
Set Screw
Locking device
Set screw
Lubrication
Relubricatable
N (in)
0.7812
N1
1.0313 in
O.D.
3.5433 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Medium duty
S
0.7480 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
5200 lbf
Static load rating
5200 lbf
Type
Pillow Block Unit
Width
2.0315 in
Technical Specifications
Type | Pillow Block Unit |
Bearing Type | Ball Bearing |
Locking Device | Set Screw |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Bearing Number | UCX09-112D1 |
Housing Number | PX09D1 |
Housing Material | Cast Iron |
Housing Construction | 1 Piece |
Performance | Medium Duty |
End Type | Open |
Dynamic Load Rating | 7850 lbf35000 N35.00 kN |
Static Load Rating | 5200 lbf23200 N23.20 kN |
Weight | 7.170 lb3.250 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.7500 in44.450 mm |
J | 6.1562 in156.0 mm |
L | 8.7500 in222.0 mm |
A | 2.6250 in67.0 mm |
H | 2.3125 in58.7 mm |
H1 | 1.0313 in26.0 mm |
H2 | 4.5625 in116.0 mm |
L1 | 2.5625 in65.0 mm |
N | 0.7812 in20.0 mm |
N1 | 1.0313 in23.0 mm |
B | 2.0315 in51.600 mm |
S | 0.7480 in19.000 mm |
F | 0.2323 in5.900 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Consolidated Bearings |
| Model | 22212 |