We never sell your data to third parties
NTN UCPG212D1 is a 2-bolt ductile iron pillow block bearing with a 60 mm bore and set screw locking. The ductile iron housing provides higher strength than standard cast iron for heavy-duty conveyor, fan, and industrial machinery applications. Pre-lubricated and ready for installation.
MODEL UCPG212D1
$893.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.9685
B (in)
2.5630
Bearing Number
UC212D1
Bearing number
UC212D1
Bearing Type
Ball Bearing
d (in)
2.3622
Dynamic Load Rating
11800 lbf
Dynamic load rating
11800 lbf
End Type
Open
End type
Open
F (in)
0.2441
H (in)
2.7480
H1
0.9843 in
H2
5.4331 in
Housing Material
Steel
Housing material
Steel
Housing Number
PG212D1
J (in)
7.2441
L (in)
9.4882
Locking Device
Set Screw
Locking device
Set screw
Lubrication
Relubricatable
Max Rotational Speed
2500 RPM
N (in)
0.7480
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
1.0000 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
8100 lbf
Static load rating
8100 lbf
Type
Pillow Block Unit
Technical Specifications
Type | Pillow Block Unit |
Bearing Type | Ball Bearing |
Locking Device | Set Screw |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Bearing Number | UC212D1 |
Housing Number | PG212D1 |
Housing Material | Steel |
Performance | Light Duty |
End Type | Open |
Dynamic Load Rating | 11800 lbf52500 N52.50 kN |
Static Load Rating | 8100 lbf36000 N36.00 kN |
Rotational Speed [Max] | 2500 RPM |
Weight | 11.700 lb5.300 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 2.3622 in60.000 mm |
J | 7.2441 in184.0 mm |
L | 9.4882 in241.0 mm |
A | 1.9685 in50.0 mm |
H | 2.7480 in69.8 mm |
H1 | 0.9843 in25.0 mm |
H2 | 5.4331 in138.0 mm |
N | 0.7480 in19.0 mm |
B | 2.5630 in65.100 mm |
S | 1.0000 in25.400 mm |
F | 0.2441 in6.200 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-451070 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-311087 |
| Brand | MCR Safety |
| Model | 9349XLD |