We never sell your data to third parties
NTN ALS205-100N bearing insert with cylindrical outer diameter and snap ring groove. Features a 1 in outside diameter and ball rolling elements. Designed for use in mounted bearing units and industrial machinery requiring a compact insert with snap ring retention.
MODEL ALS205-100N
This vendor has a minimum order quantity of 3. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$29.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 3
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
1765 lbf
Axial static load rating
1765 lbf
B (in)
0.8460
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Bearing Type
Ball Bearing
Bore Type
Cylindrical
Bore type
Cylindrical
C (in)
0.8460
D (in)
2.0470
d (in)
1.0000
DS
1/4-28 UNF
Dynamic Load Rating
3147 lbf
Dynamic load rating
3147 lbf
Enclosure
Full Contact Seal - Both Sides
G (in)
0.1890
Housing Width
0 in
Housing width
0 in
I.D.
1 in
Limiting Speed - Grease
5900 RPM
Limiting speed - grease
5900 RPM
Locking device
None
Lubrication
Non-relubricatable
Material
Through hardened steel
Number of Holes
0
Number of holes
0
O.D.
2.0472 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
Cylindrical OD
Performance
Standard Duty
r (in)
0.0394
Radial Dynamic Load Rating
3147 lbf
Radial Internal Clearance
CN
Radial internal clearance
CN
S
0.2953 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
1765 lbf
Static load rating
1765 lbf
Total Length
0.0000 in
Total length
0.0000 in
Type
Insert Bearing
Width
0.8465 in
Technical Specifications
Type | Insert Bearing |
|---|---|
Bore Type | Round |
Bearing Type | Ball Bearing |
Material | Through Hardened Steel |
Ball Material | Steel |
Limiting Speed - Grease | 5900 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Performance | Standard Duty |
Locking Device | None |
Lubrication | Non-Relubricatable |
Radial Internal Clearance | CN |
Static Load Rating | 1750 lbf7800 N7.80 kN |
Dynamic Load Rating | 3150 lbf14000 N14.00 kN |
| 0.072 lb0.158 kg | |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
|
| |
d | 1.0000 in25.400 mm |
|---|---|
D | 2.0472 in52.000 mm |
C | 0.5906 in15.000 mm |
B | 0.8465 in21.500 mm |
r | 0.0394 in1.000 mm |
ds | 1/4-28 UNF |
G | 0.1890 in4.800 mm |
S | 0.2953 in7.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | StrongHold |
| Model | 36-WP-244 |
| Brand | Consolidated Bearings |
| Model | 22240-KM C/3 |
| Brand | Allen Bradley |
| Model | 20AD3P4A1AYNNNNN |
| Brand | Nachi Bearing |
| Model | 6215-2NSEC3 |