We never sell your data to third parties
NTN AL206-104D1 is a bearing insert with a spherical outer diameter, designed for use in mounted bearing housings. It features a 1-1/4 inch bore, double sealed enclosure, and set screw locking. The insert is made of through hardened steel and is pre-lubricated for general industrial applications.
MODEL AL206-104D1
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
$34.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable:No
Axial Static Load Rating
2540 lbf
Axial static load rating
2540 lbf
B (in)
0.9370
B1
1.4055 in
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Basic Outer Ring
206
Bearing Type
Ball Bearing
Bore Type
Cylindrical
Bore type
Cylindrical
C (in)
0.9370
Collar Number
C-100
Configuration
One
D (in)
2.4410
d (in)
1 1/4
Dynamic Load Rating
4384 lbf
Dynamic load rating
4384 lbf
Enclosure
Full Contact Seal - Both Sides
F (in)
0.1520
Height
2.441
Housing Width
0 in
Housing width
0 in
I.D.
1.25 in
Length
2.441
Limiting Speed - Grease
4850 RPM
Limiting speed - grease
4850 RPM
Locking device
None
Lubrication
Relubricatable
Material
Through hardened steel
Number of Holes
0
Number of holes
0
O.D.
2.4409 in
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Ring Type
Spherical OD
Performance
Standard Duty
r (in)
0.0394
Radial Dynamic Load Rating
4384 lbf
Radial Internal Clearance
CN
Radial internal clearance
CN
S
0.3543 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
2540 lbf
Static load rating
2540 lbf
Total Length
0.0000 in
Total length
0.0000 in
Type
Insert Bearing
Technical Specifications
Type | Insert Bearing |
Bore Type | Round |
Bearing Type | Ball Bearing |
Material | Through Hardened Steel |
Ball Material | Steel |
Limiting Speed - Grease | 4900 RPM |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Performance | Standard Duty |
Configuration | One |
Locking Device | None |
Lubrication | Relubricatable |
Collar Number | C-100 |
Basic Outer Ring | 206 |
Radial Internal Clearance | CN |
Static Load Rating | 2540 lbf11300 N11.30 kN |
Dynamic Load Rating | 4400 lbf19500 N19.50 kN |
Enclosure | Double Sealed |
Weight | 0.611 lb0.277 kg |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | MROSupply Fasteners |
| Model | FSTPCK-116246 |
| Brand | JW Winco |
| Model | 782-M10-KI-2 |
| Brand | INA Bearing |
| Model | KSO20 |
