We never sell your data to third parties
NTN AELP207-106D1 is a two-bolt pillow block unit with a cast iron housing and eccentric collar locking system. The insert features a 1-1/16 inch bore and is pre-lubricated for general industrial conveyor and machinery applications.
MODEL AELP207-106D1
$85.17 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.8750
Axial Static Load Rating
3440 lbf
Axial static load rating
3440 lbf
B1
1.5315 in
Ball Material
Through Hardened Steel
Ball material
Through hardened steel
Bearing Number
AEL207-106D1
Bearing number
AEL207-106D1
Bearing Type
Ball Bearing
Bore Type
Cylindrical
Bore type
Cylindrical
Cage Material
Pressed Steel
Cage material
Pressed steel
Clearance
CN
d (in)
1.3750
Dynamic Load Rating
5778 lbf
Dynamic load rating
5778 lbf
Enclosure
Full Contact Seal - Both Sides
End Type
Open
End type
Open
F (in)
0.1142
H (in)
1.8750
H1
0.7187 in
H2
3.6562 in
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Material
Cast Iron
Housing material
Cast iron
Housing Number
P207D1
Housing Width
1.89 in
Housing width
1.89 in
I.D.
1.375 in
J (in)
5.0000
L (in)
6.5750
L1
2.1250 in
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Max Rotational Speed
4200 RPM
N (in)
0.6562
N1
0.7812 in
Number of Holes
2
Number of holes
2
O.D. (in)
2.8350
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Outside Diameter
2.8350 in
Outside Ring Type
Spherical OD
Performance
Light Duty
Precision Rating
ISO Class 0
Precision rating
ISO class 0
Radial Dynamic Load Rating
5778 lbf
Rotational Speed [Max]-Grease
4200 RPM
Rotational Speed [Max]-Oil
0 RPM
S
0.3740 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
3440 lbf
Static load rating
3440 lbf
Type
Pillow Block Unit
Width
1.5315 in
Technical Specifications
| Type | Pillow Block Unit |
|---|---|
| Bearing Type | Ball Bearing |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Bearing Number | AEL207-106D1 |
| Housing Number | P207D1 |
| Housing Material | Cast Iron |
| Housing Construction | 1 Piece |
| End Type | Open |
| Performance | Light Duty |
| Dynamic Load Rating | 5800 lbf25700 N25.70 kN |
| Static Load Rating | 3450 lbf15300 N15.30 kN |
| Rotational Speed [Max] | 4200 RPM |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.3750 in34.925 mm |
|---|---|
| J | 5.0000 in127.0 mm |
| L | 6.5625 in167.0 mm |
| A | 1.8750 in48.0 mm |
| H | 1.8750 in47.6 mm |
| H1 | 0.7187 in18.0 mm |
| H2 | 3.6562 in93.0 mm |
| L1 | 2.1250 in54.0 mm |
| N | 0.6562 in17.0 mm |
| N1 | 0.7812 in20.0 mm |
| B1 | 1.5315 in38.900 mm |
| S | 0.3740 in9.500 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Gates Rubber |
| Model | 210-2MGT-09 |
| Brand | NTN Bearing |
| Model | JELP-1.15/16 |