We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt KPS220DC (10435093) Klamploc 2-bolt pillow block ball bearing with 1-1/4" bore and concentric collar lock. Cast iron housing with single lip contact seal and nylon retainer. Fixed (non-expansion) design for intermediate-duty applications. Black oxide bearing coating and Mobil FM222 food-grade H1 grease.
MODEL 10435093
Contact supplier for technical support on: 800-626-2120
$153.82 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Ability to Relubricate
Yes
Adjustment slot width (in)
Inactive in
Adjustment Slot Width (mm)
True mm
Auxiliary cap kit
K2236 (Closed); K2206D (Open)
Auxiliary seals
1 CL CP DBL LIP BN REAR AUX
Available end cap
See AUX cap kit
Base Length (in)
6.57
Base to centerline height (in)
1.875
Base Width (in)
1.52
Bearing coating material
Black oxide
Bearing Insert Material
52100 Bearing Steel
Bolt hole spacing (width) (in)
4.96
Bore Shape
Straight
Bore size (in)
1.25 in
Cage Material
Molded fiber glass reinforced nylon
Cage Type
Ball Riding Retainer
Distance between bolt holes (in)
4 31/32
Distance from Bearing Centerline to Cap Face (in)
1 9/16
Distance from Bearing Centerline to Inside of Cap Face (in)
1 15/32 in
Distance from Bearing Centerline to Outer Most Bearing Face (in)
1 7/64 in
Duty/Series
Intermediate duty
Fixed vs. Expansion
Fixed
Foot Height (in)
0.79
Grease Fitting Thread Size
RP 1/8 par
Height
2.44
Housing Color
Black
Housing construction
One Piece
Housing height (in)
4 1/4 in
Housing material
Polyamide
Housing style
Pillow Block
Housing type
Pillow Block, Two Bolt
Inner Ring Outside Diameter (in)
1.847
Insert
SG220ELK8299A
Length
7.94
Length Through Bore (in)
1.563
Lubrication type
Mobil FM222 food grade H1
Max distance between bolt holes (in)
E Lip Seal;Closed Unit w/ End Cap & Seal;Open Unit w/ Auxiliary Seal
Max distance between bolt holes (mm)
1 7/8
Maximum Speed (RPM)
4800 rpm
Maximum Temperature (C)
90 C
Maximum Temperature (F)
194 F
Misalignment Capability
±2.0° Misalignment - Static Only
Misalignment Type
Static Only
Mounted clearance
C3 standard
Mounting bolt hole slot length (in)
15/16 in
Mounting bolt size (in)
1/2 in
Mounting pad height (in)
25/32 in
Mounting pad length (in)
6 37/64 in
Mounting pad width (in)
1 33/64 in
Outer Ring Land Profile
Standard
Radial Dynamic Load Capacity (lb)
5810 lb
Radial Static Load Capacity (lb)
3440 lb
Retainer type
Nylon
Rolling element
Ball Bearing
Seal kit
K220E (back auxiliary seal)
Seal type
Single lip contact seal
Setscrew torque (in-lbs)
165-185 in/lbs
Shaft locking
Set Screw
Size code
207
Special lube fitting
STD Fitting plus plastic plug
Unit of dimension
in
Vibration frequency fundamental train
0.0067 cps
Vibration frequency inner ring defect
0.0905 cps
Vibration frequency outer ring defect
0.0595 cps
Vibration frequency roller spin
0.0383 cps
Volume
0.393
Volume unit
GLL
Width
4.69
1 1/4" Mounted Ball Bearing, Intermediate Duty, Polyamide 2-Bolt Pillow Block, Setscrew Locking, Single Lip Contact Seal, Closed end cap and rear auxilary dual lip seal
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Siemens Controls |
| Model | 3RV1011-0AA10 |
| Brand | E-Z Lok |
| Model | E1560 |
| Brand | SealMaster |
| Model | RPBXT 315-C4 |
| Brand | MasterDrive |
| Model | 750H100 |