We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 081280 P2B-SCBED-204S two-bolt pillow block bearing with 2-1/4" bore, 65-degree set screw locking, cast iron housing, 211 series ball bearing, QuadGuard seals. Non-expansion fixed mount for reliable shaft positioning. 2-1/4" bore Pillow Block 2-Bolt Ball Bearing with Set Screw locking used in Dirty & Dusty Environment applications
MODEL P2B-SCBED-204S
Contact supplier for technical support on: +1-864-284-5700
$250.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
211 series
Base to center height
2.4400 in, 61.976 mm
Bearing type
Ball, ball
Bolt Diameter
0.6250 in
Bolt to bolt max
7.4400 in, 188.976 mm
Bolt to bolt min
6.3800 in, 162.052 mm
Bore
2 1/4 in
Bore length
2.2200 in, 56.388 mm
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 1/4
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Lubrication type
Grease
Max Speed
2500 RPM
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.2500 in
Standoff housing
No
Static load capacity
6588 lbf, 29304.884 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-40, TS-300
Type
Pillow block 2-Bolt
- Housing Type: Two-bolt pillow block mount
- Bore Diameter: 2-1/4" (57.15mm)
- Locking Mechanism: 65-degree set screw for maximum holding power
- Housing Material: Cast iron for durability
- Bearing Series: 211 series ball bearing
- Expansion Type: Non-expansion (fixed) for shaft positioning
- Seal Type: QuadGuard seals with flingers
- Maximum Speed: 2500 RPM
- Static Load Rating: 6588 lbf
- Weight: 7.2 lbs
- Applications: General industrial machinery, conveyor systems, pumps
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#130121
Brand
Dodge
Model
P2B-SC-207-HT
#5002964
Brand
Dodge
Model
P2B-SCBED-204S
#5003784
Brand
Dodge
Model
P2B-SXRB-203-HTS
#5904119
Brand
Dodge
Model
P2B-DLM-115-LL
| Brand | Hubbell Wiring |
| Model | HJMS03140 |
| Brand | Coilhose |
| Model | EXT06CN45-DPB |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreSKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/