We never sell your data to third parties
Dodge 139826 FB-SCEZ-104S-PSS MODS Three-Bolt Flange Bearing with 1-1/4" bore, E-Z Kleen corrosion-resistant design. Polymer housing with stainless steel insert, 65-degree set screw locking, QuadGuard seal. 206 series non-expansion. 1-1/4" bore 3-Bolt Flange Bracket Ball Bearing with Set Screw locking used in Washdown applications
MODEL FB-SCEZ-104S-PSS MODS
Contact supplier for technical support on: +1-864-284-5700
$318.60 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Washdown
Ball bearing series
206 series
Bearing type
Ball, ball
Bolt Diameter
0.3750 in
Bolt to bolt max
1.8800 in, 47.752 mm
Bolt to bolt min
1.8800 in, 47.752 mm
Bore
1 1/4 in
Bore Diameter
1-1/4"
Bore length
1.5200 in, 38.608 mm
Corrosion Protection
E-Z Kleen grade
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Expansion Type
Non-expansion (fixed) bearing
Greasable
Yes
High temp
No
Housing construction
Solid
Housing material
Polymer
Housing Material
Polymer (PBT thermoplastic)
Housing option
Polymer
Housing type
Flanged bracket
Housing Type
Three-Bolt Triangular Flange (FB)
Insert material
Stainless steel
Insert Material
Stainless steel
Insert option
Stainless steel
Insert type
Ball Bearing
Locking
Set screw
Locking Type
65-degree set screw (SCEZ E-Z Kleen)
Lubrication type
Grease
Relubrication
Yes
Seal option
QuadGuard seals with flingers
Seal type
Triple-lip contact
Sensor ready
Adapter required
Series
206 series ball bearing (smaller ring
Shaft attachment
Setscrew
Shaft diameter
1.2500 in
Standoff housing
No
Suitable for high temperature
No
Suitable for washdown
Yes
Type
3-bolt flange bracket
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#131756
Brand
Dodge
Model
WSTU-SC-104
#791401
Brand
Dodge
Model
F4B-SCEZ-012-SHSS
#791312
Brand
Dodge
Model
F4B-SCEZ-104S-SHSS
#153735
Brand
Dodge
Model
096176
#143287
Brand
Dodge
Model
26A20L14
| Brand | Champion |
| Model | 1705-33 |
| Brand | Cooper Wiring |
| Model | E1017-377K |
| Brand | Champion |
| Model | BR8-370 |
| Brand | Cleveland |
| Model | C44609 |
SKU: 118299
Prompt & great service
As usual MRO Supply team are quick in shipping the ordered parts correctly without any delay.. Will shop online again confidently knowing they offer very good and prompt service!
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/