We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF F2B 012-RM is a 3/4 inch shaft 2-bolt flange bearing unit with a cast iron housing. The insert bearing is pre-lubricated and designed for light to moderate radial loads. Suitable for conveyor systems, fan supports, and general industrial drives.
MODEL F2B 012-RM
$43.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Application
For material handling applications
Attachment Bolt Diameter
9.525 mm
Basic Dynamic Load Rating
12.7 kN
Basic Static Load Rating
6.55 kN
Bearing Material
Bearing steel
Bearing Sealing
Seal on both sides
Bore Type
Cylindrical
Centre Distance Between Bolt Holes
89.7 mm
Coating
Without
Fastening Bolt Hole Type
Plain
Flanged Housing Type
Oval
Grease Fitting
With
Hexagonal Key Size for Set Screw
3.175 mm
Housing
Cast iron
Housing Overall Width
29 mm
Housing Type
Flanged
Inner Ring Retaining Feature
Set screws
Limiting Speed
8500 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
2
Pack Height
92 mm
Pack Length
92 mm
Pack Width
42 mm
Relubrication Hole
With
Rubber Seating Ring
Without
Sealing Type
Contact, standard
Set Screw
1/4-28 UNF
Set Screw Tightening Torque
4 N·m
Shaft Diameter
19.05 mm
Total Bearing Width
25.5 mm
Total Width
37.4 mm
Unit Sealing
Optional end cover
Oval flanged ball bearing unit with cast iron housing, narrow inner ring and set screw locking, North American standards
These oval flanged ball bearing units consists of an insert bearing mounted in a cast iron housing that can be bolted to a machine wall or frame. The units have set screw locking which makes them suitable for applications where the direction of rotation is constant or alternating, and they can be relubricated through a grease fitting in the housing. These units are especially suitable for bearing arrangements that operate under tough conditions with relatively heavy loads.
- Accommodate high levels of contamination
- Designed for high speeds and temperatures
- Ready to mount
- Lubricated and sealed bearings
- Quick locking onto the shaft
SKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Bell & Gossett |
| Model | 186827LF |
| Brand | System Plast |
| Model | 16S00025-SSA |
SKU: 319331
Agradecimiento.
Excelente servicio, confiable, rápido y efectivo. Los seguiré llamando para mis necesidades.
Read moreSKU: 315294
Bearing
Old hard to find bearing for a 85 year old tractor. Fit perfect and price was great.
Read moreSKU: 2067505
Skf 6205-2z/gjn
Item is exactly what I was looking for. Like always you get high quality with SKF
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF