We never sell your data to third parties
SKF IR 60X70X25 is a needle roller bearing inner ring with a 60mm bore, 70mm outer diameter, and 25mm width. This inner ring is designed for use with needle roller and cage assemblies in applications requiring high radial load capacity in a compact cross-section.
MODEL IR 60X70X25
$67.21 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Inner ring for needle roller bearings, IR series
- Enable full interchangeability of inner rings
- Standard SKF inner rings for needle roller bearings
- Accommodate axial displacement in both directions
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#1496877
Brand
Koyo Bearing
Model
JR60X70X25
| Brand | SKF Bearing |
| Model | SYH 1.15/16 FM |
| Brand | CoxReels |
| Model | HP1125-5-200-AB |
| Brand | Bestorq |
| Model | B120 |
| Brand | Techtop |
| Model | GR3-CI-TF-184T-4-B-D-5 |
| Brand | STIEBER |
| Model | RSCI-80 |
| Brand | Gates Rubber |
| Model | CX173 |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF