We never sell your data to third parties
IPTCI SFL 206 2-Bolt Flange Set Screw mounted ball bearing unit with 1-1/4" bore. Standard lip seal. Cast iron housing. Suitable for standard industrial shafting applications.
MODEL SFL 206
Contact supplier for technical support on: 704 588 1091
$101.68 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
A - Dimension
5 9/16 Inch141 mm
B - Dimension
3 5/32 Inch80 mm
Bolt Used
3/8 Inch
G - Dimension
1/2 Inch13 mm
I - Dimension
45/64 Inch18 mm
L - Dimension
1 7/32 Inch31 mm
A - Dimension |
5 9/16 Inch141 mm |
E - Dimension |
4 19/32 Inch116.7 mm |
I - Dimension |
45/64 Inch18 mm |
G - Dimension |
1/2 Inch13 mm |
L - Dimension |
1 7/32 Inch31 mm |
S - Dimension |
15/32 Inch11.9 mm |
B - Dimension |
3 5/32 Inch80 mm |
Bolt Used |
3/8 Inch |
SKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
SKU: 1152690
Itpci bearings
IPTCI bearings seem to perform well for us, as we have had no returns for failure. Prices are reasonable and service is prompt.
Read more