We never sell your data to third parties
Dodge 138951 F4BSO-SCFS-012-SHFS four-bolt stainless steel flange bearing with 3/4" bore, setscrew locking, 204 series ball bearing insert, triple-lip contact seal, stand-off housing design for washdown environments
MODEL F4BSO-SCFS-012-SHFS
Contact supplier for technical support on: +1-864-284-5700
$229.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ball Bearing Series
204 Series
Bearing Type
Ball
Bolt Diameter
0.3750 in
Bolt to Bolt Max
2.5000 in
Bolt to Bolt Min
2.5000 in
Dodge Part No.
138951
Expansion Capability
Non-Expansion(Fixed)
Greasable
No
Housing Construction
Solid
Housing Material
Stainless Steel
Length Through Bore
1.2300 in
Lubrication Name
MobilGrease FM222
Maximum Speed
950 rpm
Seal
Triple-Lip Contact
Series
204
Shaft Attachment
Setscrew
Shaft Diameter
0.7500 in
Standoff Housing
Yes
Suitable For Washdown
Yes
Suitablefor High Temperature
No
Type
Four-Bolt Flange
- Housing Type: Four-bolt flange with stand-off design
- Bore Diameter: 3/4" (19.05mm)
- Locking Type: Set screw (65° angle)
- Housing Material: Stainless steel
- Bearing Series: 204 series ball bearing
- Seal Type: Triple-lip contact seal
- Configuration: Non-expansion (fixed)
- Application: Ultra Kleen series for food processing, pharmaceutical, and washdown environments requiring corrosion resistance and sanitary design
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreHow do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Edwards |
| Model | 55233522 |
SKU: 126887
Bearings
Order arrived on time, could have been packed a little tighter as the boxes the bearings came in were tore up. All is good as i used all of them instead of leaving them set in inventory.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/