We never sell your data to third parties
Dodge 076016 P2B-SCED-215 two-bolt pillow block bearing with 2-15/16" bore, 65-degree set screw locking, extreme duty construction with Grade 10 balls, QuadGuard seal, cast iron housing, 215 series, non-expansion fixed design for dirty and dusty environments.
MODEL P2B-SCED-215
Contact supplier for technical support on: +1-864-284-5700
$426.39 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Application
Dirty & dusty environment
Ball bearing series
215 series
Base to center height
3.5000 in, 88.9 mm
Bearing Series
215 series ball bearing insert
Bearing type
Ball, ball
Bolt Diameter
0.8750 in
Bolt to bolt max
9.5000 in, 241.3 mm
Bolt to bolt min
8.5000 in, 215.9 mm
Bore
2 15/16 in
Bore length
2.3300 in, 59.182 mm
Bore Size
2-15/16"
Configuration
Non-expansion (fixed)
Duty
Standard Duty
Expansion
No
Expansion capability
Non-expansion (fixed)
Greasable
Yes
High temp
No
Housing
Cast iron
Housing construction
Solid
Housing material
Cast iron
Housing option
Cast iron
Housing type
Two-bolt pillow block
I.D.
2 15/16
Insert material
Steel
Insert option
Bearing steel
Insert type
Ball Bearing
Locking
Set screw
Locking Mechanism
65-degree set screw
Lubrication type
Grease
Max Speed
1750 RPM
Relubrication
Yes
Rolling element
Standard duty ball
Seal option
QuadGuard seals with flingers
Sensor ready
Adapter required
Shaft attachment
Setscrew
Shaft diameter
2.9375 in
Standoff housing
No
Static load capacity
11108 lbf, 49410.846 N
Suitable for high temperature
No
Suitable for washdown
No
Take-up frame size
LD-50,TS-350
Type
Pillow block 2-Bolt
Specifications
- Catalog Number: 076016
- Engineering Number: P2B-SCED-215
- Housing Type: Pillow Block 2-Bolt
- Bore Size: 2-15/16" (74.612mm)
- Locking Type: Set Screw
- Duty Rating: Standard Duty
- Expansion Type: No
- Seal Type: QuadGuard seals with Flingers
- Bearing Type: Standard Duty Ball
- Weight: 17.8600 lb
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
#791358
Brand
Dodge
Model
P2B-SCED-215
#6500248
Brand
Dodge
Model
F2BSO-SCFS-012-SHFS
#792254
Brand
Dodge
Model
TS-350X9-TUFR
#2247198
Brand
Dodge
Model
127332
#2247199
Brand
Dodge
Model
127333
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/