We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
NTN UELP207D1 is a 2-bolt cast-iron pillow block unit with an eccentric collar locking mechanism. It features a 35 mm bore and a pre-lubricated ball bearing insert. Designed for general industrial applications such as conveyors, fans, and light-duty machinery.
MODEL UELP207D1
$89.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.8750
B1
2.0118 in
Bearing Number
UEL207D1
Bearing number
UEL207D1
Bearing Type
Ball Bearing
d (in)
1.3780
Dynamic Load Rating
5800 lbf
Dynamic load rating
5800 lbf
End Type
Open
End type
Open
F (in)
0.1811
H (in)
1.8750
H1
0.7187 in
H2
3.6562 in
Housing Construction
1 Piece
Housing construction
1 Piece
Housing Material
Cast Iron
Housing material
Cast iron
Housing Number
P207D1
I.D.
35 mm
J (in)
5.0000
L (in)
6.5625
L1
2.1250 in
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Max Rotational Speed
4200 RPM
N (in)
0.6562
N1
0.7812 in
O.D.
72 mm
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
0.7402 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
3450 lbf
Static load rating
3450 lbf
Type
Pillow Block Unit
Width
51.1 mm
Technical Specifications
Type | Pillow Block Unit |
|---|---|
Bearing Type | Ball Bearing |
Locking Device | Eccentric Locking Collar |
Seal Type | Contact |
Seal Material | Nitrile Rubber |
Bearing Number | UEL207D1 |
Housing Number | P207D1 |
Housing Material | Cast Iron |
Housing Construction | 1 Piece |
End Type | Open |
Performance | Light Duty |
Dynamic Load Rating | 5800 lbf25700 N25.70 kN |
Static Load Rating | 3450 lbf15300 N15.30 kN |
Rotational Speed [Max] | 4200 RPM |
Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
d | 1.3780 in35.000 mm |
|---|---|
J | 5.0000 in127.0 mm |
L | 6.5625 in167.0 mm |
A | 1.8750 in48.0 mm |
H | 1.8750 in47.6 mm |
H1 | 0.7187 in18.0 mm |
H2 | 3.6562 in93.0 mm |
L1 | 2.1250 in54.0 mm |
N | 0.6562 in17.0 mm |
N1 | 0.7812 in20.0 mm |
B1 | 2.0118 in51.100 mm |
S | 0.7402 in18.800 mm |
F | 0.1811 in4.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Timken Belts |
| Model | R3VX1120-6 |
| Brand | MCR Safety |
| Model | S1GX2 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-847175 |
| Brand | Moline Bearing |
| Model | 19311203 |
| Brand | Fenner Industrial Motion |
| Model | T121024 |