We never sell your data to third parties
NTN UELUP206D1 is a narrow-style 2-bolt pillow block with an eccentric collar locking mechanism and a 30 mm bore. The cast iron housing supports a ball bearing insert for light to moderate radial loads in conveyor and material handling applications.
MODEL UELUP206D1
$115.01 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
A (in)
1.8750
B1
1.9055 in
Bearing Number
UEL206D1
Bearing number
UEL206D1
Bearing Type
Ball Bearing
d (in)
1.1811
Dynamic Load Rating
4400 lbf
Dynamic load rating
4400 lbf
End Type
Open
End type
Open
F (in)
0.1811
H (in)
1.6875
H1
0.4687 in
H2
3.3125 in
Housing Material
Steel
Housing material
Steel
Housing Number
UP206D1
J (in)
2.5937
j (in)
0.7187
L (in)
3.6875
Locking Device
Eccentric Locking Collar
Locking device
Eccentric locking collar
Lubrication
Relubricatable
Max Rotational Speed
4900 RPM
N
M14 x 2
Operating Temperature Range
-40 to 250 °F
Operating temperature range
-40 to 250 ºF
Performance
Light Duty
S
0.7205 in
Seal Material
Nitrile Rubber
Seal material
Nitrile rubber
Seal Type
Contact
Seal type
Contact
Static Load Rating
2540 lbf
Static load rating
2540 lbf
Type
Pillow Block Unit
Technical Specifications
| Type | Pillow Block Unit |
|---|---|
| Bearing Type | Ball Bearing |
| Locking Device | Eccentric Locking Collar |
| Seal Type | Contact |
| Seal Material | Nitrile Rubber |
| Bearing Number | UEL206D1 |
| Housing Number | UP206D1 |
| Housing Material | Steel |
| End Type | Open |
| Performance | Light Duty |
| Dynamic Load Rating | 4400 lbf19500 N19.50 kN |
| Static Load Rating | 2540 lbf11300 N11.30 kN |
| Rotational Speed [Max] | 4900 RPM |
| Operating Temperature Range | -40 to 250 F-40 to 120 C |
Dimensional Specifications
| |
| d | 1.1811 in30.000 mm |
|---|---|
| J | 2.5937 in66.0 mm |
| L | 3.6875 in94.0 mm |
| A | 1.8750 in48.0 mm |
| H | 1.6875 in42.9 mm |
| H1 | 0.4687 in12.0 mm |
| H2 | 3.3125 in84.0 mm |
| N | M14x2 |
| j | 0.7187 in18.0 mm |
| B1 | 1.9055 in48.400 mm |
| S | 0.7205 in18.300 mm |
| F | 0.1811 in4.600 mm |
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Allen Bradley |
| Model | 22DJ2-3001 |
| Brand | Consolidated Bearings |
| Model | LS-75100 |
| Brand | PEER Bearing |
| Model | 6300-ZZD-C3 |