We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Link-Belt UGR224JNL 10406817 unmounted ball bearing insert with 1-1/2" bore, set screw locking, and C3 internal clearance. Part of the UG200 series, this standard-duty insert features a 52100 bearing steel inner ring with Buna single lip contact seal and steel retainer. Dynamic load rating 7330 lbf, static 4460 lbf. Max speed 6000 RPM.
MODEL 10406817
Contact supplier for technical support on: 800-626-2120
$271.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Available seal type
E3 Triple Lip Seal; N Lip Seal; H Labyrinth Seal
Bearing Type
Standard Duty
Bore length (in)
1 23/32 in
Bore size (in)
1.5 in
C dynamic load rating
7330 lb
Co static load rating
4460 lb
Height
2.00
Inner ring hub diameter (in)
2.083 in
Inner Ring Width (in)
1.188 in
Length
4.00
Locking collar outside diameter (in)
2 3/8 in
Locking collar width (in)
23/32 in
Locking Type
Set screw
Lubrication type
EXXON RONEX MP STD
Maximum Speed (RPM)
6000 rpm
Maximum Temperature (C)
107 C
Maximum Temperature (F)
225 F
Mounted clearance
C3 standard
Outer Ring Width (in)
0.8661 in
Outside diameter (in)
3.1496 in
Primary seal
BUNA single lip contact seal
Retainer type
Steel
Service instructions
BR3-007 LB 200 ball-300 ball
Setscrew torque (in-lbs)
165-185 in/lbs
Short Hub Length (in)
0.4330 in
Size code
208
Type of seal
N lip seal
Unit of dimension
in
Vibration frequency fundamental train
0.0065 cps
Vibration frequency inner ring defect
0.0912 cps
Vibration frequency outer ring defect
0.0588 cps
Vibration frequency roller spin
0.0367 cps
Volume
0.524
Volume unit
CDM
Width
4.00
1 1/2" Unmounted Ball Bearing, Standard Duty, Setscrew Locking, Single Lip Contact Seal, Steel Retainer, Reversed Assembled, Relubricatable, Spherical OD
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
| Brand | Flowtrend |
| Model | 9612309407 |
| Brand | Hydraulic Technologies |
| Model | RHA306 |
| Brand | MRO Supply |
| Model | D200554 |
| Brand | Ringfeder |
| Model | 7013.0-2.1250 |
| Brand | Nidec |
| Model | 1893 |
