We never sell your data to third parties
SKF F3BR 107-SRB-SRH is a three-bolt round flange bearing unit for 107mm shaft with set screw locking. The cast-iron housing supports a spherical roller bearing insert, pre-lubricated for industrial applications such as fans, conveyors, and material handling equipment.
MODEL F3BR 107-SRB-SRH
$284.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Attachment Bolt Diameter
12.7 mm
Basic Dynamic Load Rating
82.8 kN
Basic Static Load Rating
91.5 kN
Bearing Housing Seal Type
Radial lip seal
Bearing Insert
Spherical roller bearing
Bearing Material
Bearing steel
Bearing Position
Locating
Bore Type
Cylindrical
Coating
Without
Flanged Housing Type
Round
Grease Fitting
With
Housing
Cast iron
Housing Overall Width
52.3875 mm
Housing Type
Flanged
Inner Ring Retaining Feature
Set screws
Limiting Speed
5120 r/min
Lubricant
Grease
Number of Bolt Holes for Fasteners
3
Pack Height
78 mm
Pack Length
167 mm
Pack Width
167 mm
Pitch Diameter of Bolt Holes of Round and Triangle Flange Type Housing
127 mm
Relubrication Hole
With
Shaft Diameter
36.5125 mm
Total Bearing Width
69.85 mm
Total Width
71.4375 mm
Unit Sealing
Optional end cover
Three-bolt round flange roller bearing units consist of a spherical roller bearing mounted in a cast iron housing that can support rotating shafts through walls, bulkheads or other flat surfaces. The units are shaft-ready, pre-assembled and pre-greased, for installation right out of the box. Locating and non-locating variants can be specified while the standard set screw mounting accommodates rotation in both directions. End covers are optional.
- Ready to mount
- Factory lubricated and sealed
- Long service life
- Minimal maintenance
How do I choose the right type of bearing for my application?
Start with the load and how it’s applied. You need to know if you’re dealing with radial loads, axial loads, or a mix of both. Then look at speed, operating environment, and space constraints. For example, ball bearings are great for high speed and lighter loads, while roller bearings handle heavier loads but usually at lower speeds. If there’s contamination, moisture, or heat involved, you may need sealed bearings or specific materials. In most cases, the right choice comes down to matching load type, speed, and environment to the bearing design.
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF