Gates Rubber - Page 6 - MROSupply.com

#172577

Gates 8MX-36S-21 is a Poly Chain GT2 sprocket with 36 teeth, 8MX pitch, and 21 mm face width. Designed for synchronous drives using Poly Chain GT Carbon belts, it provides positive engagement and high torque capacity. The minimum-bore design allows custom finishing to match specific shaft sizes.

Brand	Gates Rubber
Model	8MX-36S-21

$121.63 Each

Free Shipping orders over $100

#172586

Gates 8MX-50S-21 is a Poly Chain GT2 sprocket with 50 teeth, 8MX pitch, and 21 mm face width. Designed for synchronous drives using Poly Chain GT Carbon belts, it provides positive engagement and high torque transmission. The minimum-bore design allows custom machining to fit specific shaft sizes.

Brand	Gates Rubber
Model	8MX-50S-21

$190.58 Each

Free Shipping orders over $100

#172624

Gates 8MX-60S-36 is a Poly Chain GT2 sprocket with 60 teeth, 8MX pitch, and 36 mm face width. Designed for synchronous drives using Poly Chain GT Carbon belts, it provides positive engagement and high torque transmission. The pilot-bore design allows custom finishing to match specific shaft sizes.

Brand	Gates Rubber
Model	8MX-60S-36

$251.37 Each

Free Shipping orders over $100

#172675

Gates 14MX-28S-20 is a Poly Chain GT2 sprocket with 28 teeth, 14M pitch, and 20 mm face width. Designed for synchronous drives using Poly Chain GT Carbon or ADV belts. The minimum-bore design allows custom finishing to match shaft requirements.

Brand	Gates Rubber
Model	14MX-28S-20

$145.97 Each

Free Shipping orders over $100

#172727

Gates 14MX-60S-37 is a Poly Chain GT2 sprocket with 60 teeth, 14M pitch, and 37 mm face width. Designed for synchronous drives using Poly Chain GT Carbon or ADV belts. The minimum-bore design allows finishing to customer shaft requirements.

Brand	Gates Rubber
Model	14MX-60S-37

$509.50 Each

Free Shipping orders over $100

#172761

Gates 14MX-48S-68 is a Poly Chain GT2 sprocket with 48 teeth, 14M pitch, and 68 mm face width. Designed for synchronous drives using Poly Chain GT Carbon or ADV belts. The minimum-bore design allows custom machining to fit specific shaft sizes.

Brand	Gates Rubber
Model	14MX-48S-68

$481.12 Each

Free Shipping orders over $100

#172881

Gates 20-IDL-SPRK is an idler sprocket with a 20 mm width and 0.78" belt width, featuring a 6308 bearing. Designed for use in industrial power transmission systems to guide and tension belts. Constructed with precision-machined components for reliable performance in belt drive applications.

Brand	Gates Rubber
Model	20-IDL-SPRK

$656.91 Each

Free Shipping orders over $100

#173046

Gates P20-5MGT-15-MPB is a Poly Chain GT2 sprocket with 20 teeth, 5MGT pitch, and 15 mm face width. Designed for synchronous drives using Poly Chain GT Carbon or PowerGrip GT2 belts. The minimum-bore design allows custom machining to fit specific shaft sizes.

Brand	Gates Rubber
Model	P20-5MGT-15-MPB

$56.12 Each

Free shipping

#173184

Gates P28-8MGT-50-MPB is a PowerGrip GT2 sprocket with 28 teeth, 8MGT pitch, and 50 mm face width. Designed for synchronous drives requiring positive engagement and zero-slip torque transmission. Features a pilot-bore design for precise mounting on industrial power transmission systems.

Brand	Gates Rubber
Model	P28-8MGT-50-MPB

$156.24 Each

Free Shipping orders over $100

#173630

Gates P22-5M-15AL is a PowerGrip HTD sprocket with 22 teeth, 5M pitch, and 15 mm face width. Designed for synchronous drives requiring positive engagement and zero-slip torque transmission. Features an aluminium hub for lightweight, corrosion-resistant performance in industrial applications.

Brand	Gates Rubber
Model	P22-5M-15AL

$30.22 Each

Free shipping

#173760

Gates PB30XL037 is a PowerGrip Timing Pulley with 30 teeth, XL .200-inch pitch, and 0.375" face width. Designed for positive-drive synchronous systems requiring precise timing and zero-slip power transmission. Constructed from high-strength materials for reliable performance in industrial timing belt drives.

Brand	Gates Rubber
Model	PB30XL037

$45.26 Each

Free shipping

#178183

Gates A59 is a Hi-Power II V-Belt with A section, 59" effective length, 1/2" top width, and 5/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Constructed with fiber-loaded EPDM compound for resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	A59

$12.49 Each

Free shipping

#178190

Gates A66 is a Hi-Power II V-Belt with A section, 66" effective length, 1/2" top width, and 5/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	A66

$13.54 Each

Free shipping

#178194

Gates A70 is a Hi-Power II V-Belt with A section, 70" effective length, 1/2" top width, and 5/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides oil and heat resistance for long service life.

Brand	Gates Rubber
Model	A70

$14.43 Each

Free shipping

#178198

Gates A74 is a Hi-Power II V-Belt with A section, 74" effective length, 1/2" top width, and 5/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	A74

$15.06 Each

Free shipping

#178209

Gates A85 is a Hi-Power II V-Belt with A section, 85" effective length, 1/2" top width, and 5/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	A85

$16.66 Each

Free shipping

#178261

Gates B40 is a Hi-Power II V-Belt with B section, 40" effective length, 21/32" top width, and 7/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	B40

$13.83 Each

Free shipping

#178265

Gates B44 is a Hi-Power II V-Belt with B section, 44" effective length, 7/16" depth, and 21/32" top width. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Constructed with fiber-loaded EPDM compound for long service life and minimal stretch.

Brand	Gates Rubber
Model	B44

$15.05 Each

Free shipping

#178273

Gates B52 is a Hi-Power II V-Belt with B section, 52" effective length, 7/16" depth, and 21/32" top width. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Constructed with fiber-loaded EPDM compound for long service life and minimal stretch.

Brand	Gates Rubber
Model	B52

$16.26 Each

Free shipping

#178274

Gates B53 is a Hi-Power II V-Belt with B section, 53" effective length, 21/32" top width, and 7/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides oil and heat resistance for long service life.

Brand	Gates Rubber
Model	B53

$16.37 Each

Free shipping

#178281

Gates B60 is a Hi-Power II V-Belt with B section, 60" effective length, 21/32" top width, and 7/16" depth. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Fiber-loaded EPDM compound provides resistance to oil, heat, and flex fatigue.

Brand	Gates Rubber
Model	B60

$17.24 Each

Free shipping

#178350

Gates B133 is a Hi-Power II V-Belt with B section, 133" effective length, 7/16" depth, and 21/32" top width. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Constructed with fiber-loaded EPDM compound for oil and heat resistance.

Brand	Gates Rubber
Model	B133

$35.73 Each

Free shipping

#178360

Gates B148 is a Hi-Power II V-Belt with B section, 148" effective length, 7/16" depth, and 21/32" top width. Designed for industrial power transmission drives requiring reliable wrapped classical belt performance. Constructed with fiber-loaded EPDM compound for oil and heat resistance.

Read 1 review

Brand	Gates Rubber
Model	B148

$39.46 Each

Free shipping

#179491

Gates 3/B90 is a Hi-Power II PowerBand V-belt with B section, 90" effective length, and 3 bands. Designed for industrial drives where multiple belts are prone to whipping or turnover. The banded construction joins individual belts into a single unit for stable power transmission.

Brand	Gates Rubber
Model	3/B90

$106.59 Each

Free Shipping orders over $100

#181038

Gates AX51 is a Tri-Power Cogged V-Belt with AX section, 51" effective length, and 1/2" top width. Designed for industrial drives requiring higher flexibility and reduced bending stress. The cogged construction dissipates heat and extends belt life in compact sheave applications.

Brand	Gates Rubber
Model	AX51

$15.03 Each

Free shipping

#181047

Gates AX60 is a Tri-Power Cogged V-Belt with AX section and 60" effective length. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction provides improved flexibility and heat dissipation compared to wrapped belts.

Brand	Gates Rubber
Model	AX60

$15.87 Each

Free shipping

#181072

Gates AX85 is a Tri-Power Cogged V-Belt with an AX section, 85" effective length, and a 1/2" top width. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction provides improved flexibility and heat dissipation compared to wrapped belts.

Brand	Gates Rubber
Model	AX85

$23.84 Each

Free shipping

#181107

Gates BX38 is a Tri-Power Cogged V-Belt with BX section and 38" effective length. Designed for industrial drives requiring higher horsepower and reduced sheave diameters. The cogged construction provides increased flexibility and cooler operation compared to wrapped belts.

Brand	Gates Rubber
Model	BX38

$16.63 Each

Free shipping

#181108

Gates BX39 is a Tri-Power Cogged V-Belt with BX section and 39" effective length. Designed for industrial drives requiring higher flexibility and heat dissipation than wrapped belts. The cogged construction reduces bending stress and allows operation on smaller-diameter sheaves.

Brand	Gates Rubber
Model	BX39

$16.94 Each

Free shipping

#181113

Gates BX44 is a Tri-Power Cogged V-Belt with BX section, 44" effective length, and 21/32" top width. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction dissipates heat and improves flex life in back-idler and small-diameter sheave applications.

Brand	Gates Rubber
Model	BX44

$19.04 Each

Free shipping

#181116

Gates BX47 is a Tri-Power Cogged V-Belt with a BX section and 47" effective length. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction provides improved flexibility and heat dissipation compared to wrapped belts.

Read 1 review

Brand	Gates Rubber
Model	BX47

$19.81 Each

Free shipping

#182879

Gates 3L180 is a Truflex V-Belt with a 3L section and 18" outside length. Designed for fractional-horsepower drives in lawn-and-garden and light industrial equipment. Features a fiber-loaded rubber compound for reliable power transmission.

Brand	Gates Rubber
Model	3L180

$7.00 Each

Free shipping

#182880

Gates 3L190 is a Truflex V-Belt with a 3L section and 19" outside length. Designed for fractional-horsepower drives in lawn and garden equipment and light industrial applications. Constructed with fiber-loaded EPDM compound for flexibility and durability.

Brand	Gates Rubber
Model	3L190

$6.34 Each

Free shipping

#182882

Gates 3L210 is a Truflex V-belt with a 3L section and 21.0" outside length. Designed for fractional-horsepower drives in lawn and garden equipment, it provides reliable power transmission. The fiber-loaded rubber construction offers flexibility and durability for light-duty applications.

Brand	Gates Rubber
Model	3L210

$7.09 Each

Free shipping

#182898

Gates 3L310 is a Truflex V-Belt with a 3L section and 31" outside length. Designed for fractional-horsepower drives in lawn and garden equipment, it provides reliable power transmission. The fiber-loaded EPDM construction resists flex fatigue and abrasion.

Brand	Gates Rubber
Model	3L310

$9.15 Each

Free shipping

#182972

Gates 4L330 is a Truflex V-Belt with a 4L section and 33" outside length. Designed for fractional-horsepower drives in lawn-and-garden and light industrial equipment. Features a fiber-loaded rubber compound for reliable power transmission.

Brand	Gates Rubber
Model	4L330

$8.51 Each

Free shipping

#184390

Gates 3/11M1400JB is a 3-band Polyflex JB belt with an 11M section and 1400 mm length. Designed for high-speed precision drives requiring compact power transmission. Polyurethane construction with aramid tensile cord provides high flexibility and resistance to oil and abrasion.

Brand	Gates Rubber
Model	3/11M1400JB

$202.27 Each

Free Shipping orders over $100

#1239666

Gates 4.25X2.00-IDL-FLAT is a flat idler pulley with a 4.25" outside diameter and 2" face width. It features a 3/4-16 threaded bore and a 6306 bearing for smooth rotation. Designed for use in belt drive systems requiring tensioning or directional change.

Brand	Gates Rubber
Model	4.25X2.00-IDL-FLAT

$315.94 Each

Free Shipping orders over $100

#1241384

Gates 2/B144 is a Hi-Power II PowerBand V-Belt with B section, 144" effective length, and 2-band construction. Designed for industrial drives requiring multiple belt capacity in a single unit. Features fiber-loaded EPDM compound for oil and heat resistance.

Brand	Gates Rubber
Model	2/B144

$108.40 Each

Free Shipping orders over $100

#1241814

Gates 4/B154 is a Hi-Power II PowerBand V-Belt with B section, 154" effective length, and 4 bands. Designed for industrial drives requiring multiple belt capacity in a single unit. Features fiber-loaded EPDM construction for oil and heat resistance.

Brand	Gates Rubber
Model	4/B154

$224.09 Each

Free Shipping orders over $100

#1241884

Gates 4/C120 is a Hi-Power II PowerBand V-Belt with C section, 120" effective length, and 4 bands. Designed for heavy-duty industrial drives where multiple belts are prone to whipping or turnover. The banded construction joins individual belts into a single unit for stable power transmission.

Brand	Gates Rubber
Model	4/C120

$320.52 Each

Free Shipping orders over $100

#1243179

Gates LL8MGT-021 is a Long-Length PowerGrip HTD belting with 8M pitch, 560 teeth, and 0.827" width. Designed for open-end synchronous drive applications requiring custom-length installation. The fiberglass tensile cord provides high strength and low stretch for precise power transmission.

Brand	Gates Rubber
Model	LL8MGT-021

$27.29 Per Foot

Free shipping

#1249599

Gates 4/5VX850 is a Super HC Molded Notch PowerBand V-belt with 5VX cogged section, 85.0" outside length, and 4 bands. Designed for heavy-duty industrial drives requiring high power transmission and reduced vibration. The molded notch construction provides increased flexibility and heat dissipation for demanding applications.

Brand	Gates Rubber
Model	4/5VX850

$346.10 Each

Free Shipping orders over $100

#1251759

Gates AX21 is a Tri-Power Cogged V-Belt with AX section, 21" effective length, and 1/2" top width. Designed for industrial drives requiring higher flexibility and reduced bending stress compared to wrapped belts. The cogged construction dissipates heat and improves belt life in small-diameter sheave applications.

Brand	Gates Rubber
Model	AX21

$9.83 Each

Free shipping

#1251763

Gates AX47 is a Tri-Power Cogged V-Belt with AX section and 47" effective length. Designed for industrial drives requiring higher horsepower capacity and reduced bending resistance. The cogged construction provides improved flexibility and heat dissipation compared to wrapped belts.

Brand	Gates Rubber
Model	AX47

$14.40 Each

Free shipping

#2231107

Gates 14GTV-3850-20 is a Poly Chain Carbon Volt Belt with 14M pitch, 3850 mm pitch length, 20 mm width, and 275 teeth. Designed for hazardous-duty synchronous drives requiring static-dissipative performance. Carbon-fiber tensile cord provides high torque capacity and zero-slip engagement.

Brand	Gates Rubber
Model	14GTV-3850-20

$539.43 Each

Free Shipping orders over $100

#2231155

Gates 8MGT-1760-36 is a Poly Chain GT Carbon Belt with 8MGT pitch, 1760 mm pitch length, 36 mm width, and 220 teeth. Designed for high-torque industrial synchronous drives requiring positive engagement and zero-slip power transmission. Carbon-fiber tensile cord provides exceptional strength and durability in demanding applications.

Brand	Gates Rubber
Model	8MGT-1760-36

$205.12 Each

Free Shipping orders over $100

#2231167

Gates 8MGT-896-62 is a Poly Chain GT Carbon Belt with 8MGT pitch, 896 mm pitch length, 62 mm width, and 112 teeth. Designed for high-torque synchronous drives requiring positive engagement and zero-slip power transmission. Carbon-fiber tensile cord provides exceptional strength and fatigue resistance for demanding industrial applications.

Brand	Gates Rubber
Model	8MGT-896-62

$231.99 Each

Free Shipping orders over $100

#2231187

Gates 14MGT-1190-20 is a Poly Chain GT Carbon Belt with 14MGT pitch, 1190 mm pitch length, 20 mm width, and 85 teeth. Designed for high-torque industrial synchronous drives requiring positive engagement and zero-slip power transmission. Features a carbon-fiber tensile cord for exceptional strength and durability.

Brand	Gates Rubber
Model	14MGT-1190-20

$191.33 Each

Free Shipping orders over $100

#2233432

Gates 8MGT-800-21 is a Poly Chain GT Carbon Belt with 8MGT pitch, 800 mm pitch length, 21 mm width, and 100 teeth. Designed for high-torque industrial synchronous drives requiring positive engagement and zero-slip power transmission. Carbon-fiber tensile cord provides exceptional strength and fatigue resistance for demanding applications.

Brand	Gates Rubber
Model	8MGT-800-21

$75.15 Each

Free shipping

#2233470

Gates 8MGT-1600-62 is a Poly Chain GT Carbon Belt with 8MGT pitch, 1600 mm pitch length, 62 mm width, and 200 teeth. Designed for high-torque industrial synchronous drives requiring positive engagement and zero-slip power transmission. Features a carbon-fiber tensile cord for high strength and low stretch.

Brand	Gates Rubber
Model	8MGT-1600-62

$308.49 Each

Free Shipping orders over $100

#2233521

Gates 92747125 14MGT-1750-90 Poly Chain GT Carbon Belts

Brand	Gates Rubber
Model	14MGT-1750-90

$975.24 Each

Free Shipping orders over $100

#2233536

Gates 92748280 14MGT-3920-125 Poly Chain GT Carbon Belts

Brand	Gates Rubber
Model	14MGT-3920-125

$2,538.01 Each

Free Shipping orders over $100

#2234547

Gates 92320065 TP2000-8MGT-20 PowerGrip GT2 Twin Power Belts

Brand	Gates Rubber
Model	TP2000-8MGT-20

$189.77 Each

Free Shipping orders over $100

#2235222

Gates 92463205 TP390H100 PowerGrip Twin Power Timing Belts

Brand	Gates Rubber
Model	TP390H100

$112.75 Each

Free Shipping orders over $100

#2239754

Gates 93361800 8V1800 Super HC Belts

Brand	Gates Rubber
Model	8V1800

$240.71 Each

Free Shipping orders over $100

#2241507

Gates 93883075 3/3VX750 Super HC Molded Notch PowerBand Belts

Brand	Gates Rubber
Model	3/3VX750

$102.93 Each

Free Shipping orders over $100

#2241532

Gates 93884050 4/3VX500 Super HC Molded Notch PowerBand Belts

Brand	Gates Rubber
Model	4/3VX500

$106.52 Each

Free Shipping orders over $100

#2242141

Gates 93894106 4/5VX1060 Super HC Molded Notch PowerBand Belts

Brand	Gates Rubber
Model	4/5VX1060

$405.76 Each

Free Shipping orders over $100

#2242145

Gates 93894132 4/5VX1320 Super HC Molded Notch PowerBand Belts

Brand	Gates Rubber
Model	4/5VX1320

$526.01 Each

Free Shipping orders over $100