WEG - MROSupply.com

#1308068

WEG SSW070061T5SZ is an SSW07 series advanced reduced voltage soft starter rated for 61 amps and universal three-phase input from 220-575VAC. This model features integrated bypass contactor, closed-loop torque control, and pump control mode to reduce water hammer. It provides motor protection including overload, phase loss, and current imbalance, with a standard duty rating of 300% current for 30 seconds and 10 starts per hour at 55°C.

Brand	WEG
Model	SSW070061T5SZ

$1,004.06 Each

Free Shipping orders over $100

#1308069

WEG SSW070085T5SZ SSW07 series advanced soft starter rated for 85 amps, universal three-phase line voltage 220-575 VAC. Features closed-loop torque control, integrated AC1 bypass contactor, and built-in class 10 electronic overload relay. Provides smooth acceleration and deceleration for motors up to 75 HP at 460V, with pump control mode to reduce water hammer. IP20 enclosure, frame size 2.

Brand	WEG
Model	SSW070085T5SZ

$1,444.20 Each

Free Shipping orders over $100

#1308070

WEG SSW070130T5SZ SSW07 series reduced voltage soft starter rated 130 A, 220-575 V three-phase. Frame 3, IP00 enclosure. Features closed-loop torque control, integrated bypass contactor, and pump control mode to reduce water hammer. Suitable for motors up to 100 HP at 460 V.

Brand	WEG
Model	SSW070130T5SZ

$1,813.23 Each

Free Shipping orders over $100

#1308126

WEG GPH2050QC4000 GPH2 series combination soft starter panel, 40 HP at 460V, 61A current rating. Pre-engineered assembly integrates an SSW07 soft starter with bypass contactor, disconnect switch, and branch circuit protection in a NEMA 4 enclosure. Provides reduced-voltage starting with torque control to limit inrush current and mechanical stress for pumps, fans, and compressors. Includes start and stop pushbuttons, run light, and fault light.

Brand	WEG
Model	GPH2050QC4000

$3,532.80 Each

Free Shipping orders over $100

#1308138

WEG GPH2075QC4000 is a GPH2 series combination soft starter, rated for 75 HP at 460V three-phase power. This unit features an integrated bypass contactor within a NEMA 1 enclosure, providing a pre-wired solution for branch circuit protection. It is designed for reduced voltage starting of three-phase induction motors in applications such as pumps, fans, and compressors, helping to limit inrush current and mechanical stress.

Brand	WEG
Model	GPH2075QC4000

$4,268.80 Each

Free Shipping orders over $100

#1308162

WEG GPH2150QC4000 GPH2 combination soft starter panel, 150 HP at 460V, NEMA 4 enclosure. Pre-engineered and pre-wired with integrated reduced voltage soft starter, branch circuit protection, and disconnect. Includes built-in bypass contactor, electronic motor protection, and control options: start pushbutton, stop pushbutton, run light, and fault light. Designed for pumps, fans, and compressors to reduce mechanical stress and inrush current.

Brand	WEG
Model	GPH2150QC4000

$6,219.20 Each

Free Shipping orders over $100

#1309458

WEG BIC0 mini mechanical interlock accessory designed to prevent simultaneous operation of two contactors, ensuring safe and reliable control circuit operation. This compact interlock kit is engineered for use with WEG CWC07/16 series contactors, providing a physical barrier to enforce a mutually exclusive state between two contactor coils.

Brand	WEG
Model	BIC0

$3.89 Each

Free shipping

#1309556

WEG CWC016-01-30L03 is a CWC series IEC contactor rated for 16A at 690VAC. This 3-pole contactor features a 24VDC coil and includes one normally closed (1NC) auxiliary contact. Designed for motor starting and power switching, it meets international standards including IEC 60947-4-1 and is suitable for industrial control panels and automation applications.

Brand	WEG
Model	CWC016-01-30L03

$30.70 Each

Free shipping

#1309575

WEG CWC016-10-30L03 is a miniature IEC contactor from the CWC series, rated for 16A at 600VAC. It features a 24VDC coil and one normally open (1NO) auxiliary contact. Designed for motor control and switching applications, this compact contactor meets international standards including UL/CSA and IEC 60947-4-1 for reliable performance in industrial automation and control panels.

Brand	WEG
Model	CWC016-10-30L03

$30.70 Each

Free shipping

#1309589

WEG CWC025-00-30V18 is a CWC series IEC contactor rated for 25A at 690VAC. This 3-pole device features a 120VAC 50/60Hz coil and is designed for general-purpose motor starting and control applications. It meets international standards including IEC 60947-4-1, UL 508, and CSA C22.2 No. 14. The compact design is suitable for panel mounting in industrial automation, HVAC, and machinery control systems.

Brand	WEG
Model	CWC025-00-30V18

$31.09 Each

Free shipping

#1309636

WEG CWC07-10-30L03 is a miniature IEC contactor from the CWC series, rated for 7A at 600VAC. It features a 24VDC coil for low-power control circuits and a single normally open (1NO) auxiliary contact for signaling or interlocking. This compact contactor is designed for general-purpose motor control and switching applications, meeting international standards including IEC 60947-4-1. Its modular design allows for easy integration into control panels and automation systems.

Brand	WEG
Model	CWC07-10-30L03

$24.09 Each

Free shipping

#1310016

WEG CWM40-00-30V18 is a three-pole IEC contactor from the CWM series, rated for 40A and motor loads up to 30 HP at 460V. It features a 120V 60Hz AC coil and is designed for general-purpose motor starting and control applications. This contactor meets international standards including IEC 60947-4-1 and is suitable for use in industrial control panels, machinery, and automation systems requiring reliable switching of three-phase power.

Brand	WEG
Model	CWM40-00-30V18

$82.82 Each

Free shipping

#1310116

WEG DIC0-1C33 is a surge suppressor diode module designed for use with CWB and CWM series IEC contactors and motor starters. This black diode module provides protection for 12-600VDC control circuits, suppressing voltage spikes and transients to extend the life of contactor coils and control devices. It is a standard accessory for industrial automation panels, ensuring reliable operation and enhanced system protection in motor control applications.

Brand	WEG
Model	DIC0-1C33

$5.44 Each

Free shipping

#1310361

WEG 02518ST3QIE284T-W22 is a 25 HP, 1800 RPM, three-phase severe duty motor built to IEEE 841 standards. This NEMA Premium efficiency (IE3) motor features a 284T cast iron frame, 460V 60Hz operation, and a Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. It is designed for demanding applications with Class F insulation, a 1.15 service factor, and inverter duty capability for use with variable frequency drives.

Brand	WEG
Model	02518ST3QIE284T-W22

$2,624.31 Each

Free Shipping orders over $100

#1310384

WEG 04018ST3QIE324T-W22 is a 40 HP, 1800 RPM, three-phase severe duty motor with NEMA Premium (IE3) efficiency. This W22 platform motor features a 324T cast iron frame, 460V 60Hz operation, and a Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. It is built to IEEE 841 standards with Class I Div 2 certification, inverter duty capability (20:1 constant torque), Class F insulation, and a 1.15 service factor for demanding industrial applications.

Brand	WEG
Model	04018ST3QIE324T-W22

$4,175.88 Each

Free Shipping orders over $100

#1311904

WEG .5018EP3ESS56C is a 0.5 horsepower, 1800 RPM, three-phase motor featuring a high efficiency EPAct design. This totally enclosed fan cooled (TEFC) motor operates on 208-230/460V 60Hz power and is built with a 56C frame and stainless steel construction for enhanced corrosion resistance in demanding environments. It is suitable for applications requiring a durable, wash-down duty motor with improved energy performance.

Brand	WEG
Model	.5018EP3ESS56C

$654.06 Each

Free Shipping orders over $100

#1311910

WEG .7518EP3ESS56C is a 0.75 horsepower, 1800 RPM, three-phase AC motor with a high efficiency EPAct rating. This totally enclosed fan-cooled (TEFC) motor features a 56C NEMA frame with C-face mounting, stainless steel construction for washdown and corrosive environments, and dual voltage 208-230/460V operation at 60 Hz. It is designed for demanding applications requiring durability and reliable performance.

Brand	WEG
Model	.7518EP3ESS56C

$749.91 Each

Free Shipping orders over $100

#1311941

WEG 00318ET3ESS182TC is a 3 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 182TC frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This stainless steel construction motor operates on 208-230/460V, 60 Hz power and features a C-face mount with feet. It is designed for washdown and corrosive environments, offering Class F insulation, a 1.15 service factor, and inverter duty capability for use with variable frequency drives.

Brand	WEG
Model	00318ET3ESS182TC

$1,748.20 Each

Free Shipping orders over $100

#1312122

WEG 00118ET3E143TC-W22 is a 1 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a 143TC frame and C-face mount. This W22 series TEFC motor features a cast iron construction, IP55 enclosure, and 208-230/460V dual voltage rating. It is designed for severe duty applications with Class F insulation, a 1.15 service factor, and is suitable for inverter duty with a 20:1 constant torque speed range. The motor meets IEEE 841 vibration standards and is Class I Div 2 certified.

Brand	WEG
Model	00118ET3E143TC-W22

$513.73 Each

Free Shipping orders over $100

#1312176

WEG 00318ET3E182TC-W22 NEMA Premium (IE3) efficiency three-phase TEFC motor, 3HP, 1760RPM, 182/4T frame with C-face mount, 208-230/460V 60Hz. Part of the W22 severe duty line with cast iron construction, IP55 enclosure, IEEE 841 vibration levels, Class I Div 2 certification, and inverter duty 20:1 constant torque.

Brand	WEG
Model	00318ET3E182TC-W22

$647.95 Each

Free Shipping orders over $100

#1312205

WEG 00518ET3E184T-W22 is a 5 HP, 1800 RPM, NEMA Premium (IE3) efficiency, three-phase motor in a Totally Enclosed Fan Cooled (TEFC) enclosure. This W22 severe duty motor features a 184T NEMA frame, 208-230/460V dual voltage rating, and 60 Hz operation. Constructed with a cast iron frame for durability, it includes IEEE 841 severe duty features, Class I Division 2 certification, IP55 protection, and inverter duty capability with a 20:1 constant torque speed range. It has a 1.

Brand	WEG
Model	00518ET3E184T-W22

$714.59 Each

Free Shipping orders over $100

#1312255

WEG 01018ET3E215T-W22 is a NEMA Premium (IE3) efficiency, three-phase, totally enclosed fan-cooled (TEFC) motor. This 10 HP, 1800 RPM motor features a 215T NEMA frame, 208-230/460V dual voltage, and the W22 severe duty platform with cast iron construction. It is rated for IEEE 841 severe duty, Class I Division 2, IP55 enclosure, and offers inverter duty capability with a 20:1 constant torque speed range. The motor includes Class F insulation, a 1.

Read 1 review

Brand	WEG
Model	01018ET3E215T-W22

$1,148.89 Each

Free Shipping orders over $100

#1312265

WEG 01036ET3E215T-W22 is a 10 horsepower, 3600 RPM, NEMA Premium efficiency (IE3) three-phase motor in a 215T frame. This W22 series TEFC motor features a cast iron construction, IP55 enclosure, and is rated for 208-230/460V, 60Hz operation. It includes IEEE 841 severe duty design, Class I Division 2 certification, and inverter duty capability with a 20:1 constant torque speed range. The motor has a 1.15 service factor, Class F insulation, and is suitable for demanding industrial applications.

Brand	WEG
Model	01036ET3E215T-W22

$1,202.13 Each

Free Shipping orders over $100

#1312372

WEG 04018ET3E324T-W22 is a 40 HP, 1800 RPM, NEMA Premium (IE3) efficiency, three-phase motor with a 324T frame and Totally Enclosed Fan Cooled (TEFC) IP55 enclosure. This W22 severe duty motor features cast iron construction, IEEE 841 vibration levels, Class I Div 2 certification, and inverter duty capability with a 20:1 constant torque speed range. It operates on 208-230/460V, 60Hz power with a 1.15 service factor and Class F insulation for demanding industrial applications.

Read 1 review

Brand	WEG
Model	04018ET3E324T-W22

$3,718.42 Each

Free Shipping orders over $100

#1312614

WEG 45036ET3G449TS-W22 is a 450 horsepower, 3600 RPM, three-phase AC motor featuring a Totally Enclosed Fan Cooled (TEFC) enclosure and NEMA Super Premium (IE4) efficiency. This W22 platform motor is built on a 449TS cast iron frame with a short shaft, rated for 460V PWS at 60Hz. It offers a 1.15 service factor, Class F insulation, and is suitable for severe duty applications with inverter duty capability up to 20:1 constant torque.

Brand	WEG
Model	45036ET3G449TS-W22

$44,152.90 Each

Free Shipping orders over $100

#1314284

WEG 00518XT3E184T is a 5 horsepower, 1800 RPM, three-phase NEMA Premium efficiency explosion proof motor. This TEFC motor features a 184T NEMA frame, 208-230/460V dual voltage rating, and 60 Hz operation. It is constructed with a cast iron frame for severe duty applications and is certified for Class I Division 1 hazardous locations. The motor includes Class F insulation, a 1.15 service factor, and IP55 protection against dust and moisture ingress.

Brand	WEG
Model	00518XT3E184T

$1,129.28 Each

Free Shipping orders over $100

#1314337

WEG 01518XT3E254T NEMA Premium (IE3) explosion proof three-phase motor, 15HP, 1770RPM, 254T frame, 208-230/460V. Totally enclosed fan cooled (TEFC) with cast iron construction, IP55 protection, and Class F insulation. Certified for Class I Division 1 Groups C, D and Class II Division 1 Groups E, F, G hazardous locations. Suitable for severe duty applications requiring reliable operation in explosive environments.

Brand	WEG
Model	01518XT3E254T

$2,379.47 Each

Free Shipping orders over $100

#1314369

WEG 02518XT3E284T is a 25 horsepower, 1800 RPM NEMA Premium efficiency explosion proof three-phase motor. This TEFC motor features a 284T cast iron frame, 208-230/460V dual voltage rating, and is designed for hazardous location applications requiring Class I Div 1 Groups C, D and Class II Div 1 Groups E, F, G certifications. It includes Class F insulation, a 1.15 service factor, and IP55 enclosure protection for severe duty operation.

Brand	WEG
Model	02518XT3E284T

$3,485.33 Each

Free Shipping orders over $100

#1315089

WEG 00518OS1CCDOL184T is a 5 horsepower, 1800 RPM, single-phase open drip proof (ODP) motor designed for compressor duty applications. This 208-230V, 60Hz motor features a 184T NEMA frame, Class F insulation, and a 1.15 service factor. The ODP enclosure provides ventilation for general-purpose use, while the compressor duty rating ensures reliable performance in demanding air compressor systems. It includes manual overload protection for enhanced motor safety and longevity.

Brand	WEG
Model	00518OS1CCDOL184T

$667.38 Each

Free Shipping orders over $100

#1315950

WEG RPW-PTCE05 RPW-PTC series thermistor motor protection relay for continuous monitoring of PTC sensors in motor windings. Supply voltage 24-240V 50/60Hz/DC. Relay output trips motor starter on over-temperature to prevent insulation damage.

Brand	WEG
Model	RPW-PTCE05

$73.82 Each

Free shipping

#2519269

WEG .7518ES3E56-S is a 0.75 HP, 1800 RPM, three-phase AC motor with a 56 NEMA frame and Totally Enclosed Fan Cooled (TEFC) construction. This standard efficiency motor operates on 208-230/460V, 60Hz power and features a rolled steel frame. It is designed for general-purpose applications requiring a durable, foot-mounted motor with ball bearings and Class F insulation.

Brand	WEG
Model	.7518ES3E56-S

$307.81 Each

Free Shipping orders over $100

#2519773

WEG 00318OT3E182T-S is a 3 horsepower, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with an open drip proof (ODP) enclosure. This rolled steel frame motor features a NEMA 182T frame, 208-230/460V dual voltage rating, and 60 Hz operation. It is designed for general-purpose industrial applications requiring high efficiency and reliable performance in non-hazardous environments.

Brand	WEG
Model	00318OT3E182T-S

$485.04 Each

Free Shipping orders over $100

#2519907

WEG 00518ET3E184T-S is a 5 horsepower, 1800 RPM, three-phase AC motor with a NEMA Premium (IE3) efficiency rating. It features a Totally Enclosed Fan Cooled (TEFC) IP55 enclosure, a 184T NEMA frame, and operates on 208-230/460V 60Hz power. This rolled steel frame motor is designed for general-purpose industrial applications, offering a 1.15 service factor, Class F insulation, and ball bearing construction for reliable performance.

Brand	WEG
Model	00518ET3E184T-S

$622.03 Each

Free Shipping orders over $100

#2519935

WEG 00518OT3E184T-S is a 5 horsepower, 1800 RPM, three-phase motor with an Open Drip Proof (ODP) enclosure and NEMA Premium (IE3) efficiency. This rolled steel frame motor features a 184T NEMA frame, operates on 208-230/460V 60Hz power, and is designed for general-purpose industrial applications requiring reliable performance and energy savings.

Brand	WEG
Model	12630271

$583.15 Each

Free Shipping orders over $100

#2520182

WEG 01018ET3E215T-S is a 10 horsepower, 1800 RPM, three-phase AC motor with a NEMA 215T frame. This NEMA Premium efficiency (IE3) motor features a Totally Enclosed Fan Cooled (TEFC) enclosure, IP55 protection, and a rolled steel construction. It operates on 208-230/460V, 60Hz power with a 1.15 service factor, Class F insulation, and is suitable for general-purpose industrial applications requiring durable, efficient performance.

Brand	WEG
Model	01018ET3E215T-S

$1,027.46 Each

Free Shipping orders over $100

#2520510

WEG 02512ES3EOW324T-W22 is a 25 HP, 1200 RPM, three-phase, standard efficiency motor designed for oil well pumping applications. This W22 Premium TEFC motor features a 324T NEMA frame, 208-230/460V dual voltage rating, and a totally enclosed fan-cooled (TEFC) IP55 enclosure. Its cast iron construction and oil well pump (OW) design provide durability for demanding vertical hollow shaft pumping duties.

Brand	WEG
Model	02512ES3EOW324T-W22

$3,486.22 Each

Free Shipping orders over $100

#2520937

WEG BCWTD100V53B4-F is a three-phase power factor correction capacitor rated for 10kVAr at 480V. This industrial capacitor is designed for fixed compensation in electrical distribution systems to improve power factor, reduce energy losses, and enhance system capacity. It is suitable for installation in capacitor banks and power factor correction panels to optimize electrical efficiency in commercial and industrial facilities.

Brand	WEG
Model	BCWTD100V53B4-F

$655.20 Each

Free Shipping orders over $100

#2520945

WEG BCWTD150V53C4-F is a three-phase power factor correction capacitor rated for 15kVAr at 480V, 50/60Hz. This unit is designed for fixed compensation in industrial and commercial electrical systems to improve power factor, reduce reactive power demand, and enhance energy efficiency. It features a robust construction suitable for panel mounting and is part of WEG's comprehensive range of power quality solutions.

Brand	WEG
Model	BCWTD150V53C4-F

$870.31 Each

Free Shipping orders over $100

#2521322

WEG CFW500-HMIR remote keypad HMI for CFW500 and MW500 variable frequency drives. This detachable human-machine interface provides remote control and monitoring with a backlit LCD display for viewing drive parameters, status, and fault messages. Tactile keys enable navigation and parameter adjustment. Supports Portuguese, English, and Spanish languages.

Brand	WEG
Model	CFW500-HMIR

$102.08 Each

Free Shipping orders over $100

#2521398

WEG CWB18-11-30D15 is an IEC contactor from the CWB series, rated for 18A at 600VAC. This three-pole contactor features a 120VAC 50/60Hz coil and includes one normally open (1NO) auxiliary contact. Designed for motor starting and power switching, it meets international standards including UL/CSA and IEC 60947-4-1 for reliable performance in industrial control applications.

Brand	WEG
Model	CWB18-11-30D15

$66.49 Each

Free shipping

#2521408

WEG CWB25-11-30D15 is an IEC contactor from the CWB series, rated for 25A at 600VAC. This 3-pole main contactor features a 120VAC 50/60Hz coil and includes one normally open (1NO) auxiliary contact. It is designed for motor starting and power switching applications, meeting international standards including UL/CSA and IEC 60947-4-1 for safety and reliability in industrial control circuits.

Brand	WEG
Model	CWB25-11-30D15

$72.37 Each

Free shipping

#2521434

WEG CWB9-11-30C03 is a CWB series IEC contactor with a 9A frame, rated for 24VDC coil voltage. This three-pole contactor features three normally open (3NO) main contacts and one normally open (1NO) auxiliary contact. It is designed for general-purpose motor starting and control applications, meeting international standards including UL/CSA and IEC 60947-4-1 for safety and performance.

Brand	WEG
Model	CWB9-11-30C03

$58.87 Each

Free shipping

#2834972

WEG 00118OT1B56-S is a 1 HP, 1800 RPM, NEMA Premium efficiency single-phase motor with an Open Drip Proof (ODP) enclosure. This rolled steel frame motor features a 56 frame size, operates on 115/208-230V at 60Hz, and includes a 1.15 service factor. It is designed for general-purpose applications requiring reliable performance and energy efficiency in a cost-effective rolled steel construction.

Brand	WEG
Model	00118OT1B56-S

$416.68 Each

Free Shipping orders over $100

#2852669

WEG MPW40-3-U004 MPW40 series manual motor protector with adjustable thermal overload setting range of 2.5-4 A. Designed for three-phase motor protection in starter applications, this overload relay features screw terminals and a maximum rated current of 40 A. Manual reset functionality enables safe operation and troubleshooting in industrial control panels.

Brand	WEG
Model	MPW40-3-U004

$63.16 Each

Free shipping

#2852676

WEG MPW40-3-U016 MPW40 series manual motor protector overload relay with adjustable trip current range of 10.0 to 16.0 Amps. Screw terminal type, maximum rated current 40 A. Provides reliable overload and short-circuit protection for three-phase motors.

Brand	WEG
Model	MPW40-3-U016

$69.15 Each

Free shipping

#2852822

WEG RWB40E-3-A4U040 is a thermal overload relay from the RWB series, designed for motor protection in industrial control circuits. This 3-pole unit features an adjustable current setting range from 8 to 40 amps, providing Class 10 trip characteristics for reliable overload and phase-loss protection. It is compatible with WEG CWB series contactors and is engineered for easy mounting and manual or automatic reset operation in motor starter applications.

Brand	WEG
Model	RWB40E-3-A4U040

$95.56 Each

Free shipping

#2853075

WEG .5018ES1BW56C-S is a 0.5 horsepower, 1800 RPM, single-phase AC motor with a standard efficiency rating. This totally enclosed fan-cooled (TEFC) motor features a NEMA 56C frame with a C-face mount and foot mount, rolled steel construction, and operates on 115/208-230V 60Hz power. It includes ball bearings, Class F insulation, and a 1.15 service factor for general-purpose applications such as fans, blowers, and light-duty machinery.

Brand	WEG
Model	.5018ES1BW56C-S

$329.59 Each

Free Shipping orders over $100

#2853109

WEG .7518ES1RFD56-S 3/4 HP, 1800 RPM, 56 frame TEFC single-phase motor with rolled steel frame. Standard Efficiency, 115-230V, 60Hz. Farm Duty design with 1.15 service factor and thermal overload protection for reliable operation in agricultural applications.

Brand	WEG
Model	.7518ES1RFD56-S

$353.33 Each

Free Shipping orders over $100

#2853124

WEG CFW500-CETH-IP Ethernet/IP communication module for plug-in installation on CFW500 series variable frequency drives. Enables high-speed industrial Ethernet connectivity for seamless integration into Ethernet/IP networks, supporting real-time control, monitoring, data exchange, and parameter configuration via standard industrial protocols.

Brand	WEG
Model	CFW500-CETH-IP

$301.40 Each

Free Shipping orders over $100

#2853128

WEG .7518ES1B56C-S is a 0.75 horsepower, 1800 RPM, standard efficiency, single-phase AC motor with a Totally Enclosed Fan Cooled (TEFC) enclosure. This rolled steel frame motor features a NEMA 56C face mount with integral feet, operates on 115/208-230V at 60Hz, and is designed for general-purpose applications requiring reliable performance. It includes ball bearings, Class F insulation, and a 1.15 service factor for durable operation.

Brand	WEG
Model	.7518ES1B56C-S

$342.49 Each

Free Shipping orders over $100

#2853168

WEG 00118ES1RFD56-S is a 1 horsepower, 1800 RPM, single-phase, standard efficiency TEFC motor designed for farm duty applications. This rolled steel frame motor features a 56 frame size, operates on 115/230V at 60Hz, and includes thermal overload protection. It is suitable for agricultural equipment such as grain handling, ventilation fans, and irrigation pumps, offering a high starting torque for demanding environments.

Brand	WEG
Model	00118ES1RFD56-S

$389.96 Each

Free Shipping orders over $100

#2853181

WEG 00118ET3E56CFL-S is a 1 HP, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with a Totally Enclosed Fan Cooled (TEFC) enclosure. This rolled steel frame motor features a 56CFL C-face footless mount, operates on 208-230/460V 60Hz power, and is designed for general-purpose applications requiring reliable performance and energy efficiency.

Brand	WEG
Model	00118ET3E56CFL-S

$376.73 Each

Free Shipping orders over $100

#2853210

WEG 00118ES1B56C-S is a 1 horsepower, 1800 RPM, standard efficiency, single-phase AC motor with a Totally Enclosed Fan Cooled (TEFC) enclosure. This rolled steel frame motor features a NEMA 56C face mount with feet, operates on 115/208-230V at 60Hz, and is designed for general-purpose applications requiring reliable performance. It includes ball bearings, Class F insulation, and a 1.15 service factor.

Brand	WEG
Model	00118ES1B56C-S

$419.65 Each

Free Shipping orders over $100

#2853429

WEG 00118ET3ESS56C is a 1 HP, 1800 RPM, three-phase motor with a NEMA Premium (IE3) efficiency rating. This TEFC (Totally Enclosed Fan Cooled) motor features a 56C frame, 208-230/460V dual voltage, and a stainless steel construction for washdown or corrosive environments. It is designed for severe duty applications requiring high resistance to moisture and chemicals.

Brand	WEG
Model	00118ET3ESS56C

$934.10 Each

Free Shipping orders over $100

#5158068

WEG .5018ES1RFDW56-S is a 0.5 horsepower, 1800 RPM, single-phase TEFC motor with a 115/230V dual voltage rating. This rolled steel frame motor (W56) features a thermally protected design (RFD) for overload protection, a 1.15 service factor, and ball bearing construction. It is suitable for general-purpose applications requiring a compact, totally enclosed fan-cooled motor with high starting torque.

Brand	WEG
Model	.5018ES1RFDW56-S

$285.10 Each

Free Shipping orders over $100

#5739459

WEG catalog number 00136OS1BCD56-S is a 1 HP, 3600 RPM, single-phase, open drip proof (ODP) motor with standard efficiency. It features a 56 rolled steel frame, 115/208-230V voltage, and is rated for 60 Hz operation. This compressor duty motor is designed for demanding applications requiring reliable starting and running torque in general-purpose industrial environments.

Brand	WEG
Model	00136OS1BCD56-S

$257.33 Each

Free Shipping orders over $100

#5739541

WEG 00218XT3E56HC is a NEMA Premium efficiency (IE3) explosion-proof three-phase motor rated 2 HP at 1800 RPM. This TEFC motor features a 56HC frame, 208-230/460V dual voltage, and 60 Hz operation. It is designed for hazardous locations with Class I Div 1 Groups C, D and Class II Div 1 Groups E, F, G certifications. The cast iron construction, IP55 enclosure, and Class F insulation provide durability for severe duty applications.

Brand	WEG
Model	00218XT3E56HC

$1,075.59 Each

Free Shipping orders over $100

#5824453

WEG 01518OT3E254T-W40 is a 15 horsepower, 1800 RPM, NEMA Premium efficiency (IE3) three-phase motor with an open drip proof (ODP) enclosure. This W40 line motor features a 208-230/460V dual voltage rating, a 254T NEMA frame, and 60 Hz operation. It is constructed with a cast iron frame and features Class F insulation, ball bearings, and a 1.15 service factor for reliable performance in general-purpose industrial applications.

Brand	WEG
Model	01518OT3E254T-W40

$1,332.99 Each

Free Shipping orders over $100

#5901169

WEG ESWC-9TM1K9-RE2 is a full voltage non-reversing (FVNR) enclosed motor starter from the ESWC series. This NEMA-rated enclosure (Type 1, 3R, 4, 12) provides protection against dust, oil, water, and corrosion for industrial applications. It features a 208-230/460V coil voltage, 8A contactor rating, and a 1.6-8A adjustable thermal overload relay for motor protection. The unit includes control circuit options and is designed for across-the-line starting of three-phase motors.

Brand	WEG
Model	ESWC-9TM1K9-RE2

$1,420.40 Each

Free Shipping orders over $100

#5902835

WEG 1311087115 is a 1 horsepower, 1800 RPM, three-phase TEFC motor with a 56C NEMA frame. It operates on 208-230/460V, 60Hz power and features a C-face mounting configuration for direct coupling to pumps, fans, and other driven equipment. The totally enclosed fan-cooled (TEFC) enclosure provides an IP55 rating for protection against dust and light moisture in industrial environments.

Brand	WEG
Model	1311087115

$1,351.86 Each

Free Shipping orders over $100