We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 117531 SD-24mm 8X3.3mm KW Metric HDW
MODEL 117531
Contact supplier for technical support on: +1-864-284-5700
$47.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
24.0000 mm, 0.945 in
Bore length
1.8100 in, 45.974 mm
Bushing size
SD
Bushing type
QD
I.D.
24 mm
Installation torque
108 in/lb, 108.0 in/lb
Integral key
No
Keyway
8 x 3.3 mm
Keyway size
8 X 7
Material
Sintered steel
Number of bolts
3
Rated Torque
5000.0000 lbf, 22241.108 N
Shaft attachment
Finished bore
QD Bushing - Metric Bore/Metric Hardware
- DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
- DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
- Stock reborable bushings available for custom reboring
- Reboring and sawsplit available from DODGE for nominal extra charge
- Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)
NOTE: Rebore by others must be sawsplit after rebore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
- QD is a registered trademark of Emerson Electric
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read more
| Brand | Timken |
| Model | 29520-2 |
| Brand | Nexen |
| Model | 966658 |
SKU: 126843
Replacement pillow block bearing
I ordered 2 Dodge Pillow block bearings to replace replace a failed bearing on my chipper and to replace a second bearing as a precaution. I received the both bearings promptly, but discovered that the failed bearing also damaged it's housing. Since the housing without a bearing doesn't seem to be readily available, I requested to return the one bearing and replace it with the complete pillow (housing with bearing). Since I was getting an entirely different part, MROSupply customer support suggested that I get a full refund for the bearing and place a new order for the pillow block (housing with bearing). I have received the pillow block and am waiting for the refund which I expect to receive very soon.
Read moreItem must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/