We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Dodge 117546 SK-38mm Quick Disconnect (QD) bushing for 38mm (1.496 in) shaft with 10x3.3mm keyway. Sintered steel construction, 3-bolt clamping, rated for 7000 lbf torque. For power transmission sheaves, sprockets, and couplings.
MODEL 117546
Contact supplier for technical support on: +1-864-284-5700
$60.65 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Bore diameter actual
38.0000 mm, 1.496 in
Bore length
1.8800 in, 47.752 mm
Bushing size
SK
Bushing type
QD
I.D.
38 mm
Installation torque
180 in/lb, 180.0 in/lb
Integral key
No
Keyway
10 x 3.3 mm
Keyway size
10 X 8
Material
Sintered steel
Number of bolts
3
Rated Torque
7000.0000 lbf, 31137.551 N
Shaft attachment
Finished bore
QD Bushing - Metric Bore/Metric Hardware
- DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
- DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
- Stock reborable bushings available for custom reboring
- Reboring and sawsplit available from DODGE for nominal extra charge
- Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)
NOTE: Rebore by others must be sawsplit after rebore
QD Bushings features and Benefits
- 4 Degree Taper
- Easy on/Easy off
- Manufactured precisely to industry standards
- Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!
Conventional Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange first
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and install in product threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
- Flanged Design
Reverse Mounting
- Easy On
- Place bushing in product
- Align clearance holes in product with threaded holes in bushing
- Install screws and lockwashers thru clearance holes, finger tight
- Slide assembly onto shaft, flange outward
- Locate assembly on shaft for proper drive align ment
- Tighten cap screws alternately and evenly to specified torque
- Easy Off
- Remove cap screws and reinstall in flange threaded holes
- Alternately and evenly tighten screws until bush ing grip is released
IMPORTANT!
Do not use lubricants or anti-seize compounds on tapered bore or bushing surfaces. Complete installation instructions are available at www.dodge-pt.com.
#127116
Brand
Dodge
Model
P2B-SCBEZ-40M-PCR
#118698
Brand
Dodge
Model
117540
#118701
Brand
Dodge
Model
117545
#118995
Brand
Dodge
Model
117546
#127144
Brand
Dodge
Model
WSTU-SCEZ-103-PCR
| Brand | JW Winco |
| Model | 8T4WP1 |
| Brand | Cutler Hammer |
| Model | CH270 |
| Brand | Airmaster |
| Model | 21330 |
| Brand | Airmaster |
| Model | 21762 |
| Brand | Airmaster |
| Model | 21780 |
| Brand | Cleveland |
| Model | C60077 |
| Brand | NSI Industries |
| Model | B16 |
Item must be unused and undamaged, in it's orginal package. For Dodge there is typically a 10% + $30 US re-stocking fee, although it may vary from case to case. Re-packing fees may apply. Re-stocking fee applies bor both returns for credit and return for exchange.
Warranty is redeemed directly with manufacturer. If your item was damaged during usage, please let us know and we will help you get in touch with your nearest service center, they will guide you about the steps to follow to redeem the manufacturer's warranty.
For further information on our returns/warranty policy, please visit:
https://www.mrosupply.com/page/returnwarranty-policy/