Dodge 117547 SK-40mm Quick Disconnect (QD) bushing, 40mm bore, 12x3.3mm keyway, sintered steel construction, 3-bolt mounting, 7000 lbf rated torque for industrial power transmission applications.

QD Bushing - Metric Bore/Metric Hardware

• DODGE QD-style bushings stocked in popular finish bore sizes and minimum plain bore, for custom reboring
• DODGE Metric QD bushings supplied with metric hex-head cap screws and lock washers
• Can be used with DODGE HTD sprockets for conventional mounting only (English thread hardware required for demounting.)

NOTE: Rebore by others must be sawsplit after rebore

QD Bushings features and Benefits

• 4 Degree Taper
• Easy on/Easy off
• Manufactured precisely to industry standards
• Conventional or Reverse Mounting, Including sizes M thru W - DODGE exclusive!

Conventional Mounting

• Easy On
• Place bushing in product
• Align clearance holes in product with threaded holes in bushing
• Install screws and lockwashers thru clearance holes, finger tight
• Slide assembly onto shaft, flange first
• Locate assembly on shaft for proper drive align ment
• Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and install in product threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released
  • Flanged Design

Reverse Mounting

• Easy On
  • Place bushing in product
  • Align clearance holes in product with threaded holes in bushing
  • Install screws and lockwashers thru clearance holes, finger tight
  • Slide assembly onto shaft, flange outward
  • Locate assembly on shaft for proper drive align ment
  • Tighten cap screws alternately and evenly to specified torque
• Easy Off
  • Remove cap screws and reinstall in flange threaded holes
  • Alternately and evenly tighten screws until bush ing grip is released

IMPORTANT!