We never sell your data to third parties
Fenner 6410150 Trantorque OE keyless bushing with 1-1/2 in bore. Self-contained single-nut design eliminates keyway machining for sprockets, sheaves, and pulleys. Zinc-plated steel construction. Provides infinite axial adjustment and high concentricity.
MODEL 6410150
Contact supplier for technical support on: 800 243 3374
$130.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Axial Movement
Approximately 0.075"
Bore Diameter
1-1/2 in
Compliancy
RoHS
Component Bore Diameter
2 in
Hub Contact Pressure
10838 psi
Hub Diameter
2.557 in
Hub Pressure (psi)
10838
Installation torque
196 ft lb
Internal/ External
Internal
Material
Steel
Overall Length
1-1/4 in
Releasing/ Locking
Locking
Self-Centering
Yes
Series
Trantorque OE
Shaft diameter
1 1/2 in
Taper
Single
Thrust
7878 lbf
Torque Transmission
512 ft lb
Transmissible Thrust
7878 lb
Transmissible Torque
512 ft-lb
The Trantorque OE Series 1-1/2” Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 1-1/2” in diameter by means of a mounted mechanical interference fit and transmits up to 483 ft lbs of torque.
Best Suited For:
Applications where speed and simplicity of installation and repositioning are critical and a small OD/ID ratio is important.
Trantorque OE Series 1-1/2” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. While maintaining a minimal OD/ID ratio, The Trantorque OE Series Keyless Bushings also have exceptional concentricity and the ability to accommodate bending loads. They also have limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.Exceptional concentricity and ability to accommodate bending loads. Limited axial movement during installation. Minimal OD/ID ratio. All Trantorque units use a single hex nut for speed and simplicity of installationFeatures of Fenner Keyless Bushings:
Ability to transmit higher torques than keyed connections. True zero-backlash. Less equipment downtime. Ability to mount over existing keyways. Complete axial and radial adjustability. Simple installation, adjustment and removalAll Fenner keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
#817675
Brand
Fenner Industrial Motion
Model
B122108
#1435831
Brand
Fenner Industrial Motion
Model
6410150
#817815
Brand
Fenner Industrial Motion
Model
B402108
#817762
Brand
Fenner Industrial Motion
Model
B302108
#1435847
Brand
Fenner Industrial Motion
Model
TTQM1023
| Brand | Marathon Electric |
| Model | 284TTFCD6832 |
| Brand | Moline Bearing |
| Model | 29231315 |
| Brand | NTN Bearing |
| Model | 22326EMKW33C3 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/