We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Fenner 6202855UP Trantorque GT keyless bushing with 36 mm bore. Self-contained single-nut installation eliminates keyway machining for sprockets, sheaves, and pulleys. Zinc-plated steel construction provides corrosion resistance. Infinite axial adjustment and high concentricity.
View suggested Climax Metal alternativeSave $3.39 on MROSupply.com preferred brand for this item - Climax Metal C801M-036
MODEL 6202855UP
Contact supplier for technical support on: 800 243 3374
$163.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Axial Movement
Approximately 1.9 mm
Compliancy
RoHS
Component Bore Diameter
60.5 mm
Finish
Zinc Chromate/Zinc Phosphate
Hub Contact Pressure
33 N/sq-mm
Hub Pressure
33 N/mm2
Installation torque
260 Nm
Internal/ External
Internal
Material
Steel
Overall Length
69.9 mm
Releasing/ Locking
Locking
Self-Centering
Yes
Series
Trantorque GT
Shaft diameter
36 mm
Taper
Single
Temperature Rating
-30 to 400 deg F
Thrust
31 kN
Torque Transmission
602 Nm
Transmissible Torque
561 N-m
The Trantorque GT Series 36mm Keyless Bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 36mm in diameter by means of a mechanical interference fit and transmits up to a maximum 561 Nm of torque.
Best Suited For:
Applications where speed and simplicity of installation and repositioning are critical and will benefit from the value added feature of a counter torque nut.
Trantorque GT Series 36mm Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Designed with an external counter torque nut for easier installation, by allowing the system to be held from rotating during installation. The Trantorque GT Series Keyless Bushing has exceptional concentricity while maintaining the ability to accommodate bending loads. There is limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installation.Designed with external counter-torque flange. Exceptional concentricity and ability to accommodate bending loads. Limited axial movement during installation. All Trantorque units use a single hex nut for speed and simplicity of installationFeatures of Fenner Keyless Bushings:
Ability to transmit higher torques than keyed connections. True zero-backlash. Less equipment downtime. Ability to mount over existing keyways. Complete axial and radial adjustability. Simple installation, adjustment and removalAll Fenner keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.
| Brand | Coilhose |
| Model | PR38-104B-G |
| Brand | Coilhose |
| Model | PFE40254T |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-586323 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-444038 |
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/