Image for Illustration purposes only. Actual product may vary

Fenner Industrial Motion B402202 B-LOC B400 2-1/8 in

Name: Fenner Industrial Motion B402202 B-LOC B400 2-1/8 in
Brand: Fenner Industrial Motion
Price: 65.95 USD
Availability: InStock
Rating: 5.0 (4 reviews)

View suggested Climax Metal alternative

MODEL B402202

BRAND

Fenner Industrial Motion

SKU

817822

WEIGHT

1.400 lb

UOM

each

Contact supplier for technical support on: 800 243 3374

$65.95 Each

Prices are subject to change

FREE SHIPPING ON ORDERS OVER $100

Select Quantity

GET A QUOTE

Typically Ships in: 1 day

Returnable: See conditions

Axial Movement

Bore Diameter

2-1/8 in

Bore tolerance

3.349

Component Bore Diameter

3.346"

Hub Contact Pressure

23951 psi

Hub Diameter

6.057 in

Hub Pressure

23951

Installation torque

26 ft lb

Internal/ External

Internal

Material

Steel

O.D.

3.346 in

Overall Length

1.26 in

Releasing/ Locking

Releasing

Screw size

M8 x 22

Self-Centering

Series

B400

Shaft diameter

2 1/8 in

Shaft Tolerance

2.122

Taper

Double

Thrust

23792

Torque Transmission

2107

Transmissible Thrust

23792 lb

Transmissible Torque

2107 ft-lb

The B-LOC B400 Series 2-1/8” Keyless Bushing provides a high capacity, zero-backlash shaft to hub connection for shafts measuring 2-1/8” in diameter by means of a mechanical interference fit and transmits up to a maximum of 2107 ft lbs of torque.

Best Suited For:

Applications that require a recessed installation of the bushing with no axial movement of the mounted component relative to the shaft during tightening.

B-LOC B400 Series 2-1/8” Keyless Bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending, and/or radial loads. Their self-releasing double taper design permits simple adjustment and removal and there is no axial movement during installation. Since the B-LOC B400 Series Keyless Bushings do not have a flange, the external diameter along the unit’s entire length is the same, therefore allowing the unit to be completely inserted into the component bore for flushed or recessed mounting.Self-releasing double taper design permits simple adjustment and removal. No axial movement during installation. Recessed installation without the need for a counterboreNote: This product is not self-centering but Fenner offers pilot bushings that provide pre-centering when required. The pilot bushings are supplied in sets of three (3) bushings and three (3) longer screws (replace plated locking screws).

Features of Fenner Keyless Bushings:

Ability to transmit higher torques. True zero-backlash. Less equipment downtime. Ability to mount over existing keyways. Complete axial and radial adjustability. Simple installation, adjustment and removalAll Fenner keyless locking devices operate using the simple wedge principle. An axial force is applied- by either a hex nut (Trantorque) or a series of annular screws (B-LOC)- to engage circular steel rings with mating tapers. The resulting wedge action creates a radial force on the tapered rings, one of which contracts to squeeze the shaft while the other expands and presses into the component bore.