We never sell your data to third parties
Morse 2657054 KK17 KK CLUTCH-900
MODEL 2657054
Contact supplier for technical support on: 800-626-2120
$355.69 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Brand
AMI Bearings
Model
UCP208
Brand
Baldor
Model
CL3501
Brand
Boston Gear
Model
FSP5A
Additional Bearing Support Requirement
No
Backstopping Clutch
Yes
Bore Size (mm)
17
Corner Radius
0.6
Dynamic Radial Load Rating (lb)
1573.7
Height
1.1
Indexing Clutch
Yes
Length
2.6
Lubrication Type
The clutches are supplied with a protective coating of oil and must be lubricated before putting into service.
Mounting Housing Diameter
1.5743/1.5737
Mounting Shaft Diameter
0.6702/0.6698
Overall Diameter (in)
1.575
Overall Width (in)
0.472
Overrunning Clutch
Yes
Product Type
KK Series
Rated Torque Capacity (ft.-lbs.)
31.7
RPM Max. - Outer Race
1900
Static Radial Load Rating (lb)
831.8
Type
CAM Clutches
Width
2.5
| Rated Torque Capacity (ft. -lbs. ) | 32 |
|---|---|
| Standard Bore Size (mm) | 17 |
| Standard Bore Size (In) | 0.669 |
| Mounting Shaft Diameter | 0.6702/0.6698 |
| Mounting Housing Diameter | 1.5743/1.5737 |
| Static Radial Load Rating (lbs. ) | 832 |
| Dynamic Radial Load Rating (lbs. ) | 1, 574 |
| Weight Unit of Measure: | EA |
|---|---|
| Weight: | 0.17 |
| Sale Qty Multiple: | 1 |
| Packaged Length: | 0 |
| Packaged Width: | 0 |
| Packaged Height: | 0 |
| No. Links/Ft. : | 0 |
| Rated Torque Capacity (ft. -lbs. ): | 32 |
| Standard Bore Size (mm): | 17 |
| Standard Bore Size (In): | 0.669 |
| Mounting Shaft Diameter: | 0.6702/0.6698 |
| Mounting Housing Diameter: | 1.5743/1.5737 |
| Static Radial Load Rating (lbs. ): | 832 |
| Dynamic Radial Load Rating (lbs. ): | 1, 574 |
| Std Package Quantity: | 1 |
| RPM Max. -inner Race: | 3500 |
| RPM Max. - Outer Race: | 1900 |
| Std Mfg Delivery: | Normally Stocked |
| Warranty: | 1 Year |
| Typical Applications: |
Dimensions
| Part No | 2657054 |
|---|---|
| Description | KK17 |
| C (mm) | 17 |
| C (In) | 0.669 |
| B (mm) | 40 |
| B (In) | 1.575 |
| A | 0.472 |
| r | 0.60 |
No questions match your search.
What is the difference between Morse MG, MO, MI and MR cam clutches? This product
All four are M Series ball bearing clutches built on the same sizes (300A to 700A, plus 750 to 1000) with the same torque per size; the second letter sets the cam cage for the job. MG is general duty: overrunning, backstopping and light indexing. MO has felt seals for low drag in high speed inner race overrunning and ships greased. MI is for high performance indexing above 150 strokes per minute or where indexing accuracy matters. MR has a cam cage that uses centrifugal force to cut cam drag in high speed outer race overrunning. Speeds differ: an MG-600A is rated 1800 rpm inner race and 700 rpm outer race, an MO-600A 2400 rpm inner race.
What do the -G and FB mean in a Morse clutch number like MG600A-G 2 FB? This product
MG is the series and duty (M Series, general duty), 600A is the size, -G means grease lubrication, packed at the factory, and 2 FB is a 2 in finished bore. Grease is supplied at no extra cost. Without -G, MG, MI and MR clutches are oil lubricated and ship without oil (MO models come greased), so fill them with automatic transmission fluid before running: half full on MG and MR, and on MI to the level in the instruction sheet. Stock bores have hardened inner races and cannot be reworked, and a matching key comes with each stock inch bore clutch.
What grease or oil can I use in a Morse cam clutch? This product
Never use EP oils or greases, or greases with graphite or molybdenum disulfide: they can make the clutch malfunction. For grease, Morse recommends a non-EP NLGI 1 or 2 premium bearing grease, mineral oil based with lithium soap thickener; synthetic polyurea greases are also acceptable. The standard oil is automatic transmission fluid, and oil is recommended for indexing and low temperatures. Intervals and temperature limits depend on the series and duty, so follow its instruction sheet: indexing, 24 hour and dusty service need more frequent relubrication. PB clutches ship greased and KK lightly greased; NSS, NFS and oil lubricated M Series clutches need oil before use.
How do I specify RH or LH on a Morse PB clutch, and can I reverse it later? This product
PB clutches (PB-3A to PB-16A) are built for one direction, so state it on the order: right hand (clockwise) or left hand (counterclockwise) drive, viewed from the end shown on the catalog drawing with the inner race driving. Our listings put it at the end of the number, such as PB-6A CLUTCH .750B RH. To change direction, the clutch goes back to the distributor or service center; do not take it apart. NSS and NFS clutches, by contrast, are reversed by turning them through 180 degrees. The PB hub snap ring (RS137 on the PB-6A) is not furnished, and a PB must not be used as a coupling.
Do Morse KK and NSS clutches fit the same space as a ball bearing? This product
Yes, the envelope matches the 6200 light series: a KK25 and an NSS25 are 52 mm OD, 25 mm bore and 15 mm wide, like a 6205. NFS clutches match the 6300 series OD and bore but are wider. The fits differ, though: NSS outer races press into a housing bored to H6 and NFS to H7, with a key the full length of the inner race (Form 4146-005). KK clutches have a built in ball bearing, carry radial load and come lightly greased; 1K means keyed inner race, 2K keyed inner and outer, 2GD sealed both sides. NSS and NFS have no radial bearing, so separate bearings must hold concentricity within .0015 in TIR.
Perfect fit
Verified · SKU 2296257Exact match with highly informed technical data to search and get the correct part. I highly recommend MRO Supply! Read more
Consistent quality
Verified · SKU 2296540Second purchase, will come again next time. Read more
Great service
Verified · SKU 2296269Absolute superb service and timely delivery. Would do business again. 🙌 Read more
Brand
Marathon Electric
Model
TCA1P13AE231GAA009
Brand
Boston Gear
Model
H2430L
Brand
Winsmith
Model
S20MPSS5220YGC
Brand
JW Winco
Model
851.1-320-T3-NI
Brand
JW Winco
Model
820.1-130-NC-NI
Brand
JW Winco
Model
451-20-15-M6-SS-55
Brand
WEG
Model
HVW701C070T2N01-I-X
Brand
BLACKSTAR
Model
BLS H80BS20 1 7/16 K2S