We never sell your data to third parties
Toshiba 4004WTAK11E-A 400 HP 1800 RPM 5011/12 US frame WPII Weather Protected Type II three-phase motor. This open enclosure WPII design provides enhanced weather protection for outdoor installations in power generation, mining, and oil and gas applications. Rated 2300/4000V, 60 Hz, high efficiency.
MODEL 4004WTAK11E-A
Contact supplier for technical support on: tic-dist1@toshiba.co
$48,896.90 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Typically Ships in: 3 days
Returnable: See conditions
Amperage
94/54
Application Type
Compressor Motors, General Purpose AC Motors
Bearing Type
Ball
Enclosure
WPII
Frame
5011/12 US
Height
57 in
HP
400
Hz
60
Insulation Class
Class F
Length
64.8 in
Material
Cast Iron
Mounting Type
Horizontal Footed
Number of Speeds
1
Phase
3
Rotation
CW/CCW
RPM
1700 - 1800
Service Factor
1.15
Shaft Diameter
3-7/8 in
Shaft Length
8-1/2 in
Special Features
Medium Voltage Motors
Temperature Rating
-13 to 104 deg F
Torque Rating
1187 ft-lb
Type
Continuous-Duty Type TIKK
Voltage
2300/4000
Width
45.3 in
Toshiba Toshiba 4004WTAK11E-A
UPC: | UNSPSC: 26101112 | GTIN:
Electric Motors > AC Motors
Toshiba AC Motor, Continuous-Duty Type TIKK, Compressor Motors, General Purpose AC Motors Application, Medium Voltage Motors Special Features, 400 hp, 2300/4000 VAC, 94/54 A, 60 Hz Frequency, 3 ph ph, 1800 rpm Speed, 1 Speed, WPII Enclosure, 5012US Frame, 3-7/8 in Dia x 8-1/2 in L Shaft, CW/CCW Rotation, 1.15 Service Factor, Ball Bearing, 1187 ft-lb Torque, Horizontal Foot Mounting, -13 to 104 deg F, Insulation Class: Class F, Cast Iron, 64.8 in L x 45.3 in W x 57 in H Dimensions
Features:
- High efficiency
- Class B temperature rise at 1.0 service factor by resistance
- IP24 protection
- Vacuum pressure impregnated system
- Polyurea base grease
- Winding RTDs (2 ph)
- Space heater
- NDE insulated bearing
- US-shaft end
- 4-pole
Specs:
- Service Factor: 1.15
- Special Features: Medium Voltage Motors
- Application Type: Compressor Motors, General Purpose AC Motors
- Insulation Class: Class F
- Shaft Size: 3-7/8 in Dia x 8-1/2 in L
- Torque Rating: 1187 ft-lb
- Phase: 3 ph
- Horsepower: 400 hp
- Number of Speeds: 1
- Rotation: CW/CCW
- Frame: 5012US
- Bearing Type: Ball
- Temperature Rating: -13 to 104 deg F
- Enclosure Type: WPII
- Speed: 1800 rpm
- Frequency Rating: 60 Hz
- Mounting Type: Horizontal Foot
- Amperage Rating: 94/54 A
- Voltage Rating: 2300/4000 VAC
- Dimensions: 64.8 in L x 45.3 in W x 57 in H
- Material: Cast Iron
- Type: Continuous-Duty Type TIKK
Packaging:
- Weight: 5000.0 lb
Certifications/Standards:
ANSI/CSA/NEC Certified | IEEE 112 | NEMA MG1
Warranty:
18 Months
| Brand | INA Bearing |
| Model | ZARF3590TN |
| Brand | Toshiba |
| Model | J2258NLFLI-C |
| Brand | JW Winco |
| Model | 278-B30-OZ-2-BL |
| Brand | Vacon VFD |
| Model | VACON-ENC-IN12-MR04-HVAC |
| Brand | Stearns |
| Model | 108702400EQF |