We never sell your data to third parties
Leeson M1125033.00 0.06 HP, 300 RPM DC gearmotor with 30 NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 180V DC at 60 Hz with Class F insulation, ball bearings, and 0.500" shaft diameter. Designed for low-speed, high-torque applications requiring reliable DC power.
MODEL M1125033.00
$544.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Current
0.36
Drive End Bearing Size
6000
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
55.9
Enclosure
TENV
Frame
30
Frame Length
2.99
Height
5.63
HP
0.06
Insulation Class
F
KW
0.04
Length
15.25
Opp. Drive End Bearing Size
6000
Opp. Drive End Bearing Type
Ball
RPM
300
Service factor
1
Shaft Diameter
0.500
Shaft Length
1
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
180
Width
7.13
Model PZ gearmotors
have the same mounting dimensions as Bodine model D and Z, Baldor/Boehm, Bison 100 gearmotors, and a number of Dayton gearmotors.
Mechanical Specifications
Precision machined in-line steel gears, with a first stage steel helical gear followed by spur-type gears. Lubrication is permanent semi-fluid grease, reducing possibility of leakage. Output shafts have needle bearings for high load capacities. Shafts are hardened steel. Conduit Box not included with motor.
Application Notes
These gearmotors are designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. The motor’s stall torque could exceed recommended full load torques. If this service is anticipated, a current limiting device should be used. This issue is even more critical for low voltage motors, typically no controller is used since motor connected directly to battery, so some type of current limit or fusing should be considered. Overhung load capacities shown are at the center of output shaft.
| RPM: 300 | Volts | 180 | Volts | |
|---|---|---|---|---|
| HPKW: 1/17 | F. L. Amps | 0.36 | F. L. Amps | |
| Frame: 30 | S. F Amps | S. F Amps | ||
| Max Amb: 40 | Hertz | Phase | ||
| Insul Class: F3 | Duty | CONT | TYPE | DN |
| Model #: 985.632 | Serv. Factor | 1.0 | PF | |
| Eff 100%: | Eff 75% | Enclosure | TENV | |
| Protection: NOT | Therm. Prot. | Bearing OPE | ||
| Design: | Code | Bearing PE | ||
| UL: Yes | CSA | Yes | CE | Yes |
| Torque lb-In: 10 | Nameplate | M100414702 | Lubrication | |
| Series: PZ | Overhung Ld. | 180 | Shaft Type | PARALLEL |
SKU: 2526181
Tablesaw motor
Great service and super fast shipping. I ordered it and received the motor the next day. Can't ask for any better than that.will be buying from them again
Read moreSKU: 227546
Great products great price & easy transaction
great products great price & easy transaction. Keep up the good work.
Read more
| Brand | Bestorq |
| Model | 147MXL025 |
| Brand | NTN Bearing |
| Model | UELFLU-1/2 |
| Brand | Martin Sprocket |
| Model | CMES2026X50L4D |
SKU: 2526181
Tablesaw motor
Great service and super fast shipping. I ordered it and received the motor the next day. Can't ask for any better than that.will be buying from them again
Read moreSKU: 227546
Great products great price & easy transaction
great products great price & easy transaction. Keep up the good work.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/