We never sell your data to third parties
Leeson M1125070.00 0.13 HP, 31 RPM DC gearmotor with a 30 NEMA frame and Totally Enclosed Non-Ventilated (TENV) enclosure. Operates on 90V DC at 60 Hz. Permanent magnet DC gearmotor designed for SCR drive control applications. Class F insulation, ball bearings. Regal Rexnord brand.
MODEL M1125070.00
$774.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Current
1.4
Drive End Bearing Size
6000
Drive End Bearing Type
Ball
Duty
Continuous
Efficiency
67.2
Enclosure
TENV
Frame
30
Frame Length
4.91
Height
6.69
HP
0.13
Insulation Class
F
KW
0.10
Length
16.5
Opp. Drive End Bearing Size
6000
Opp. Drive End Bearing Type
Ball
RPM
31
Service factor
1
Shaft Diameter
0.625
Shaft Length
1.5
Shaft type
Parallel
Thermal protection
No Protection
UL
Recognized
Voltage
90
Width
7.68
Applications
This gearmotor is designed for mounting at any angle, but motor below the reducer should be avoided to prevent leakage of lubricant into the motor should the motor shaft seal fail. Motor’s stall torque could exceed recommended full load torques. A current limiting device such as an SCR control should be used to prevent damage. This issue is even more critical for low voltage motors, typically no controller is used since motor is connected directly to a battery, so some type of current limit or fusing should be considered. Overhung load capacities shown are at center of output shaft.
Features
- Made in the USA
- Steel frame
- Precision machined in-line steel gears
- First stage steel helical gear followed by spur-type gears
- Lubrication is permanent semi-fluid grease, reducing possibility of leakage
- Output shafts have needle bearings for high load capacities
- Shafts are hardened steel
- Conduit box not included, optional conduit box available
- Footnotes: S, US
SKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read moreSKU: 2834607
Above and beyond the call
We are very satisfied with MRO with special thank you going to Ariel for going above and beyond to get the job done and help us avoid a problem. Thank you
Read more
#227378
Brand
Leeson
Model
M1125074.00
#227376
Brand
Leeson
Model
M1125072.00
#227375
Brand
Leeson
Model
M1125071.00
| Brand | Nachi Bearing |
| Model | 6210C3 |
| Brand | Allen Bradley |
| Model | 1734-IB8S |
SKU: 2525011
Product fine shipping not so much
The Leeson motor was fine and worked as it should. The shipping however had alot to be desired. I know the product was coming from the Allentown warehouse which is about a 35 min drive but still took 4 days to get here and when it arrived the box was trashed. I know this is not your fault and is more of a FedEx issue but something to be aware of.
Read moreSKU: 2834607
Above and beyond the call
We are very satisfied with MRO with special thank you going to Ariel for going above and beyond to get the job done and help us avoid a problem. Thank you
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/