We never sell your data to third parties
WEG UCWT10V57 N20 is a 10 kVAR power factor correction capacitor from the UCWT series, rated for 535V at 60Hz. This industrial capacitor is designed for fixed compensation in low-voltage electrical installations to improve power factor, reduce energy losses, and enhance system capacity. It is suitable for use in capacitor banks for motors, transformers, and other inductive loads.
MODEL UCWT10V57 N20
Contact supplier for technical support on: 800-ASK-4WEG
$107.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Complement
Heavy Duty
Operational frequency
60 Hz
Rated operational voltage UE
535V60Hz
Reactive power
10.0�kVAr
Series
E
Terminal type
Screw
WEG power factor correction capacitors were designed using self-healing metallized polypropylene film, have security protection against internal over pressure and lower dielectric losses.
- Self-healing, metalized polypropylene film with dry dielectric
- Safety interrupting device against internal overpressure
- Maximum allowed fault current 10, 000 A
- Dielectric losses below 0.4 W/kVAr
- Built-in load resistors in the three-phase units, modules and banks
- Technical specification as per NBR IEC 60831-1/2 and UL810
SKU: 1312372
New 40hp motor
We had our 40hp compressor go down. We determined over the weekend that a motor winding was bad. First think Monday morning I consulted with the techs at MRO and verified that the manufacturer had a replacement in stock so I placed the order. The new motor (600 lbs) arrived on Wednesday... WOW. Granted the motor was in Georgia and we are in Tennessee but still the service and speedy delivery was incredible!
Read moreSKU: 1315116
Motor purchase
Excellent pricing, very fast delivery, accurate tracking information, motor arrived in perfect condition.
Read moreSKU: 1309979
Always easy to order, usually the best price!
Not our first order from MRO Supply. Will order again as the need arises.
Read more
| Brand | Ringfeder |
| Model | 7013.1-28x55 |
| Brand | NSK Bearings |
| Model | N1012BTKRCC1P4 |
| Brand | PEER Bearing |
| Model | FHFLCTQ204-20MM |
| Brand | Century |
| Model | WD250DCF |
SKU: 1312372
New 40hp motor
We had our 40hp compressor go down. We determined over the weekend that a motor winding was bad. First think Monday morning I consulted with the techs at MRO and verified that the manufacturer had a replacement in stock so I placed the order. The new motor (600 lbs) arrived on Wednesday... WOW. Granted the motor was in Georgia and we are in Tennessee but still the service and speedy delivery was incredible!
Read moreSKU: 1315116
Motor purchase
Excellent pricing, very fast delivery, accurate tracking information, motor arrived in perfect condition.
Read moreSKU: 1309979
Always easy to order, usually the best price!
Not our first order from MRO Supply. Will order again as the need arises.
Read more