Leeson 103408.00 0.33 HP, 1725 RPM three-phase washdown duty motor with an 80 NEMA frame and a Totally Enclosed Non-Ventilated (TENV) enclosure. Features a stainless steel frame, 208-230/460V at 60 Hz, 1.0 service factor, and Class F insulation. UL and CSA listed.

Regal Beloit Leeson&Reg; 103408.00

UPC: 691720211731 | UNSPSC: 26101602 | GTIN:

Electric Motors > AC Motors

LEESON® Washguard® AC Motor, 4-Pole Continuous Duty, Special Features: IEC Metric Motors, Washdown Duty Motors, 0.33 hp, 208 to 230/460 VAC, 1.3 to 1.3/0.65 A, 60 Hz, 3 ph, 1725 rpm, 1 Speed, Totally Enclosed Nonvented (TENV), 80 Frame, 0.75 in Dia x 1.57 in L Shaft, Reversible, Service Factor: 1.15, Ball Bearing, 16 ft-lb, B5 Flange/Rigid Base Mount, 40 deg C, Insulation Class: Class F, Stainless Steel, 10:1 Variable Torque Speed, 7.87 in Dia x 9.5 in L

Features:

• All exterior components are 300 series stainless steel
• All sealing components are FKM for superior chemical resistance
• Full fact nameplate is laser etched on the motor frame
• End shields are O-ring sealed to the frame
• Double lip shaft seals on both ends of TEFC motors
• Removable hydrophobic breathers in opposite shaft end bell and conduit box equalize pressure without allowing moisture to enter
• Exterior fastener use minimized reducing the number of entry points for moisture
• Double sealed bearings are pre-lubricated with moisture resistant high temperature grease for long life
• Interior coatings applied to rotor and stator protect against corrosion and ease to clean construction
• New conduit box mounting system provides optimum sealing
• Ease to clean construction

Specs:

• Type: 4-Pole Continuous Duty
• Material: Stainless Steel
• Dimensions: 7.87 in Dia x 9.5 in L
• Voltage Rating: 208 to 230/460 VAC
• Amperage Rating: 1.3 to 1.3/0.65 A
• Mounting Type: B5 Flange/Rigid Base
• Frequency Rating: 60 Hz
• Speed: 1725 rpm
• Enclosure Type: Totally Enclosed Nonvented (TENV)
• Temperature Rating: 40 deg C
• Bearing Type: Ball
• Frame: 80
• Rotation: Reversible
• Number of Speeds: 1
• Horsepower: 0.33 hp
• Phase: 3 ph
• Torque Rating: 16 ft-lb
• Shaft Size: 0.75 in Dia x 1.57 in L
• Insulation Class: Class F
• Special Features: IEC Metric Motors, Washdown Duty Motors
• Service Factor: 1.15
• Variable Torque Speed Range: 10:1

Certifications/Standards:

BISSC 769 | CSA Certified | CSA LR33543 | UL E57948

Warranty:

1 Year