Image for Illustration purposes only. Actual product may vary
EM2551TS-12 75HP, 1775RPM, 3PH, 60HZ, 365TS, 4462M, OPSB, F
MODEL EM2551TS-12
Contact supplier for technical support on: 479-646-4711
$9,644.83 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $1
Select Quantity
Free Gift with this product
Typically Ships in: 1 day
Returnable: See conditions
Still Deciding?
Add this item to your saved items and easily come back later.
Hz
60
Frame
365TS
HP
75
Voltage
230/460
Phase
3
RPM
1700 - 1800
Enclosure
OPSB
| Output | 75 |
|---|---|
| RPM | 1775 |
| Pallet Quantity | 0 |
| Specification Number | 44E018W162G1 |
| Frame | 365TS |
| Weight | 749. 000 LB |
| Multiplier | L1 |
| Enclosure | OPSB |
| Item Type | MOTOR |
| Manufacturing Plant | COLUMBUS |
| Voltage | 230/460 |
| Poles | 04 |
| Class | STOCK |
| Type | 4462M |
| Status | Active |
| Commodity Code | 8501. 52. 8040 |
| Origin | US |
| Revision | C |
|---|---|
| Status | PRD/A |
| Change # | 783708 |
| Proprietary | No |
| Type | AC |
| Prod. Type | 4462M |
| Elec. Spec | 44WGW162 |
| CD Diagram | CD0104 |
| Enclosure | OPSB |
| Manufacturing Plant | COLUMBUS |
| Mech. Spec | 44E018 |
| Layout | 44LYE018 |
| Frame | 365TS |
| Mounting | F1 |
| Poles | 04 |
| Created Date | 8/6/2010 |
| Base | RG |
| Rotation | R |
| Insulation | F |
| Eff. Date | 2/1/2013 |
| Leads | 12#8 |
| Literature | |
| Elec. Diagram | |
| Replaced By |
Specification History for EM2551TS-12
| Active | Specification Number | Plant | Date | Description |
|---|---|---|---|---|
| 44E018W162G1 | BALDOR/COLUMBUS | 8/10/2010 | 62M 4P OPSB HOR 365TS SE |
| Nameplate No. | NP2138L |
|---|---|
| CAT. NO. | EM2551TS-12 |
| P/N | |
| ENCLOSURE | OPSB |
| SPEC. | 44E018W162G1 |
| CC | 010A |
| FRAME | 365TS |
| S/N | |
| HP | 75 |
| CLASS | F |
| HZ | 60 |
| RPM | 1775 |
| PH | 3 |
| DES | B |
| VOLT | 230/460 |
| KVA-CODE | F |
| ODE BRG | 6312 |
| DE BRG | 6313 |
| AMP | 170/85 |
| USABLE AT 208V | |
| RATING | 40C AMB-CONT |
| GREASE | POLYREX EM |
| NEMA-NOM-EFF | 95 |
| PF | 87 |
| SER. F. | 1. 15 |
| HTR-VOLTS | |
| HTR-AMPS | |
| MAX. SPACE HEATER TEMP. |
General Characteristics
| Full Load Torque | 222 LB-FT |
|---|---|
| Start Configuration | DOL |
| No-Load Current | 26. 4 Amps |
| Break-Down Torque | 617 LB-FT |
| Line-line Res. @ 25°C. | 0. 0781 Ohms A Ph / 0 Ohms B Ph |
| Pull-Up Torque | 239 LB-FT |
| Temp. Rise @ Rated Load | 30°C |
| Locked-Rotor Torque | 332 LB-FT |
| Temp. Rise @ S. F. Load | 37°C |
| Starting Current | 512 Amps |
Load Characteristics
| % of Rated Load | 25 | 50 | 75 | 100 | 125 | 150 | S. F. |
|---|---|---|---|---|---|---|---|
| Power Factor | 56 | 77 | 83 | 87 | 87 | 87 | 87 |
| Efficiency | 93. 6 | 95. 5 | 96 | 95. 3 | 94. 9 | 93. 9 | 95. 1 |
| Speed (RPM) | 1794 | 1788 | 1782 | 1776 | 1769 | 1761 | 1772 |
| Line Amperes | 34. 1 | 48. 2 | 66. 2 | 85. 4 | 106 | 128 | 97. 8 |
Parts for current product
| Product Number | Description | Quantity | |
|---|---|---|---|
| SA201360 | SA 44E018W162G1 | 1 EA | |
| RA188659 | RA 44E018W162G1 | 1 EA | |
| S/P107-000-004 | SUPER-E(284 FR. & UP)-CL PLANT, POLYREX E | 1 EA | |
| HA6731 | LIFTING LUG FOR 44 FRAME MOTORS. | 2 EA | |
| HA6616A01 | CAST ADAPTOR, 44 FRAME - NEMA 364-5 - MA | 1 EA | |
| 19XW3816A16 | . 38-16 X 1. 00 HEX WASHER HEAD TAPTITE II | 2 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 2 EA | |
| 10CB3002A02 | CB 309 3. 62 LD HOLE, . 38 MTG HOLE & 3. 50 | 1 EA | |
| 19XW3118A16 | . 31-18 HEX WASHER HEAD TAPTITE II 1. 00 L | 4 EA | |
| HW1001A31 | LOCKWASHER 5/16, ZINC PLT. 591 OD, . 319 I | 4 EA | |
| WD1000B16 | KPA-4C BURNDY TERMINAL | 1 EA | |
| 51XF2520A08 | SCREW, HEX SER SLT HD, ZN 1/4-20 X. 50 L | 1 EA | |
| 44EP1203A02 | FREP, MACH | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| HW5100A15 | W4997-050 WVY WSHR (WB) | 1 EA | |
| 10XN3816K48 | 3/8-16 X 3 HEX HD CAP SCREW, Z/P | 4 EA | |
| HW1001A38 | LOCKWASHER 3/8, ZINC PLT. 688 OD, . 382 I | 4 EA | |
| 44EP1203A01 | PU ENDPLATE, MACH | 1 EA | |
| HA4051A00 | PLASTIC CAP FOR GREASE FITTING | 1 EA | |
| XY5013A12 | NUT, 1/2-13, HEX, STEEL, ZINCPLATED | 8 EA | |
| 10CB3500SP | CONDUIT BOX LID, CAST | 1 EA | |
| 51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X. 75 | 4 EA | |
| HW2501H18 | KEY, 1/2 SQ X 2. 000 | 1 EA | |
| LB1115 | LABEL, LIFTING DEVICE | 1 EA | |
| HW4500A03 | GREASE FITTING, . 125 NPT 1610(ALEMITE) 8 | 1 EA | |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 1 EA | |
| MJ1000A75 | GREASE, POLYREX EM EXXON | 0. 03 LB | |
| HW4500A03 | GREASE FITTING, . 125 NPT 1610(ALEMITE) 8 | 1 EA | |
| HW4500A20 | 1/8NPT SL PIPE PLUG | 1 EA | |
| MG1000Y03 | WILKO 689. 710 GOLD PAINT SUPER E | 0. 08 GA | |
| 85XU0407A04 | #4-7 X 1/4 DRIVE PIN | 4 EA | |
| LB5040 | INSTRUCTION TAG, AC & DC | 1 EA | |
| 44AD2001A02 | BAFFLE 44 OPEN, 'X'=1. 50, SLOTTED BAND MT | 1 EA | |
| 44AD2001A02 | BAFFLE 44 OPEN, 'X'=1. 50, SLOTTED BAND MT | 1 EA | |
| HA3175A02 | THRUBOLT STUD 1/2-13 X 24. 500 - GRADE 2 | 4 EA | |
| LB1119 | WARNING LABEL | 1 EA | |
| LB1125C02 | SUPER-E (STOCK CTN LABEL SUPER-E WITH FL | 4 EA | |
| LC0104A01 | CONNECTION DIAGRAM | 1 EA | |
| NP2138L | ALUM SUPER-E UL CSA-EEV PREM CC (300 | 1 EA | |
| 44PA1000 | PK GP COMB PRINT 39-3/8X31X23-7/8 | 1 EA | |
| LB1506 | LABEL 'AMERICAN MADE' 1. 50 X 1. 00 | 1 EA |
#699452
Brand
Baldor
Model
EM2551T-5
#699454
Brand
Baldor
Model
EM2551TS-12
#699451
Brand
Baldor
Model
EM2551T-12
#23035
Brand
Baldor
Model
EM2551T
#23036
Brand
Baldor
Model
EM2551T-8
When you get to checkout, you’ll be able to select a free gift! Depending on the cart value, you’ll be shown relevant gifts your order qualifies for.
$500
MRO Hat
MRO Golf Balls
MRO Hi-Vis Vests
MRO Mug
$750
32oz Water Bottle
Throw Blanket
30 piece Hex Set
Telescopic Pick Up
$1,250
Golf Cooler
11-in-1 Screw Driver Set
Gorilla Grip Knee Pad
John Deere Oilskin Hat
$2,500
Igloo 1/2 Gallon Jug
Rechargable Headlamp
Larix Trucker Hat
$5,000
Igloo 10 Gallon Cooler
Igloo Party Bucket Cooler
Klein Tools Speaker
Klein Tools 8-in-1
$7,500
GX-6F Pro Golf Range Finder
Bushnell Outdoorsman Speaker
Jaeger 24px Ratcheting Wrench Set
Aspen Beverage Bucket
Item must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/