Baldor MACCUSTOMMOTOR 200 HP, 3600 RPM three-phase industrial electric motor with NEMA 445TS frame and Totally Enclosed Fan Cooled (TEFC) enclosure. Designed for demanding high-speed applications such as large pumps, fans, and compressors. Features cast iron construction for durability and reliable performance in industrial environments.

 BASIC CONFIGURATION
Partial Motor Design No
Frame Band 318
Customer Application General Industrial
Temp Code None
ELECTRICAL
Ambient Minimum -25C
Winding Type Random
Starting Method Standard Start
Standard NEMA Inertia 172
MOUNTING
Mounting Position F-1
Frame Mounting Foot (Dual Mounting Hole)
 Foot Planarity Standard (0.005 IN/FT)
Drive Method Coupled
Mounting Orientation Horizontal
Shaft - Special Material No
Shaft Extension TS
BEARINGS
Drive End Seal Lip
Seals Lip Material Nitrile
Opposite Drive End Seal Lip
Lube Type Grease
Grease Type Exxon Polyrex EM
Grease Fittings Rqd Yes
Grease Fitting Type Alemite 1610 or equal
Grease Relief Fittings Rqd Yes
Relief Fitting Type Alemite
MECHANICAL
Balance Standard (0.15 in/sec)
Rotation Facing ODE Bi-directional
Fan Material Standard
Ingress Protection IP55
Paint System Two Coat Epoxy (C3)
Paint Color Specification Standard Epoxy
Paint Color Blue-Green
Baldor-Reliance Paint Spec No 004824-007BXT / MG1025N19
Frame Grounding Required Yes
Ground Pad Type Drilled & Tapped Hole in Frame
Ground Pad Location Frame - same side as main CB
Auto Drain Type “T” Drain – Stainless Steel
CONDUIT BOX
Main Conduit Box Required
Main Conduit Box Location Standard (side)
Main Conduit Box Material Cast Iron
Main Conduit Box Size Standard Oversize
Terminal Panel No
Lead Entry Location Toward Feet - Down
Bus Bars / Standoffs No
NAMEPLATE / LABELS
Nameplate Language English
Additional heater Markings No
Efficiency Marking DOE CC Mark Required
PACKAGING
Packaging Type Standard Packing
DOCUMENTATION
Document Unit of Measure US
Certified Dimension Sheet Yes
Performance Data/Curves Yes