We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL2321 LKG PLUG 20A 250V L6-20P B/W
MODEL HBL2321
This vendor has a minimum order quantity of 17. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$26.43 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 17
Typically Ships in: 1 day
Returnable: See conditions
Amperage
20A
Color
Black/White
Cord dia
360 in-0.930 in
HP
2
Voltage
250V AC
2P3W, 20A 250V, L6-20P, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Plug |
| Wiring Scheme | 2-Pole, 3-Wire Grounding |
| Amperage | 20A |
| Voltage | 250V AC |
| NEMA Configuration | L6-20P |
| Item Style | Insulgrip |
| Device Color | Black/White |
| Horsepower | 2 |
| Cord Dia. | .360"-.930" (9-24) |
| Blade Holder Material | Natural White Nylon |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Blade Material | Brass |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 20A #12 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | FED SPEC UL/CSA |
| UPC Number | 783585037820 |
| Weight in LBs | 0.2 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read more
#1021151
Brand
Hubbell Wiring
Model
HBL2613
#1021124
Brand
Hubbell Wiring
Model
HBL2611BK
#1021273
Brand
Hubbell Wiring
Model
HBL2641
#1025252
Brand
Hubbell Wiring
Model
HBL7314GCB
#1020434
Brand
Hubbell Wiring
Model
HBL2313BK
| Brand | Dormer Pramet |
| Model | S2174.0XD4 |
| Brand | HKK Chain |
| Model | 35-3R10 |
| Brand | Gates Rubber |
| Model | 1VP50.1/2 |
| Brand | Cle-Line |
| Model | C17526 |
| Brand | Hubbell Wiring |
| Model | RAYFSQFLA |
| Brand | Kipp |
| Model | K2125.95114AEX15 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/