We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL2811BK LKG PLUG 30A 3P 120/208V L21-30P BK
MODEL HBL2811BK
This vendor has a minimum order quantity of 8. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$60.14 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 8
Typically Ships in: 1 day
Returnable: See conditions
Amperage
30 A
Color
Black
Connectivity
Pressure Terminal Screws
Cord dia
35 in-1.15 in
Cord range
0.350 in-1.150 in (9-29)
Cord type
All Listed Portables
Current / amperage rating
30 A
Current rating
30 A
Dielectric strength
Withstands 2,000V minimum
Dimensions
2.75 in x 2.33 in x 2.33 in
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Height
2.33 in
HP
3
Length
2.75 in
Material
Nylon
Material - mounting hardware
Cord Mounted
Max HP
3
Nema Rating
L21-30P
Number of poles
4-Pole
Number of wires
5-Wire Grounding
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Phase
3 Phase WYE
Voltage
120/208 VAC
Voltage rating description
120/208 VAC
Width (in)
2.33
Wire size
#16 AWG to #8 AWG
4P5W, 30A 3PH 120/208V AC, L21-30P, Black & White Nylon
Specifications
| Product Type | |
|---|---|
| Product Item | Plug |
| Wiring Scheme | 4-Pole, 5-Wire Grounding |
| Amperage | 30A |
| Voltage | 3 Phase Y 120/208V AC |
| NEMA Configuration | L21-30R |
| Item Style | Insulgrip |
| Device Color | Black/White |
| Horsepower | 3 |
| Cord Dia. | .35"-1.15" (9-29) |
| Blade Holder Material | Natural White Nylon |
| Terminal Retainer Material | Clear polycarbonate |
| Housing Material | Black nylon |
| Cord Clamp Material | Natural (white) nylon |
| Blade Material | Brass |
| Terminal Clamp Material | .08" (2) steel-nickel plated |
| Terminal Screw Material | #10-32 Brass (white finish on neutral screw when used) Multi-drive |
| Ground Screw Material | #10-32 Brass (green finish) Multi-drive |
| Cord Clamp Screw Material | Steel, zinc plated Multi-drive |
| Body Holding Screw Material | Steel, zinc plated Multi-drive |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Cord Accommodation | Round portable service cords of diameters commensurate with the device rating as defined in UL Standard 62, CSA C22.2 No.49. |
| Terminal Accommodation | 30A #10 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | HB or better per UL 94 or CSA 22.2 No.0.6 |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Moisture Resistance | IP20 |
| Listings | FED SPEC UL/CSA |
| UPC Number | 783585039633 |
| Weight in LBs | 0.35 |
SKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read more
| Brand | Precision Twist Drill |
| Model | 6480828 |
| Brand | IKO Bearing |
| Model | ST406080UUB |
| Brand | LS Electric |
| Model | 1298000500 |
| Brand | Timken |
| Model | E-PF-TRB-125MM |
| Brand | Grundfos |
| Model | 96847179 |
| Brand | FK Bearing |
| Model | JML6T |
| Brand | Hammond Power Solutions |
| Model | P003QKKB |
| Brand | Wiegmann |
| Model | RH115230V25W |
SKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreSKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/