We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Hubbell Wiring HBL7540 LKG DUP RCPT 15A 125V L1-15R
MODEL HBL7540
This vendor has a minimum order quantity of 16. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: jruvalcaba@hubbell.c
$26.79 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 16
Typically Ships in: 1 day
Returnable: See conditions
Amperage
15A
Color
Black
Connectivity
Screw terminals
Current rating
15 A
Dielectric strength
Withstands 2,000V minimum
Dimensions
3.28 in x 1.32 in x 1.19 in
Environmental conditions
Indoor Dry Unless Protected By Additional Means
Finish type
Powder Epoxy Paint
Height
1.19 in
HP
0.5
Length
3.28 in
Material
Thermoplastic
Material - mounting hardware
Screw Mounting
Max HP
0.5
Operating temperature
Maximum continuous 75C and minimum -40C without Impact
Phase
Single phase
Voltage
125V AC
Width (in)
1.32
Wire size
#18 AWG to #10 AWG
2P2W, 15A 125V, L1-15R, Duplex, Black Phenolic
Specifications
| Product Type | |
|---|---|
| Product Item | Duplex Receptacle |
| Wiring Scheme | 2-Pole, 2-Wire Non-Grounding |
| Amperage | 15A |
| Voltage | 125V AC |
| NEMA Configuration | L1-15R |
| Item Style | Standard |
| Device Color | Black |
| Horsepower | 0.5 |
| Terminal Screw Material | #8-32 Brass |
| Ground Screw Material | #8-32 Brass (Green) |
| Contact Spring Material | .031" Brass |
| Mounting Screw Material | Steel-zinc-plated |
| Cover (Top) Material | Black Thermoset |
| Base Material | Black Thermoset |
| Ground Contact Material | .031" Brass |
| Bridge (Mounting Strap) Material | .050" Steel-zinc-plated |
| Rivet Material | Brass |
| Ratings | Molded In or Stamped On |
| Catalog No | Permanently ink marked on product |
| Dielectric Voltage Withstand | 2, 000V minimum |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Max 30C temperature rise at full rated current after 50 cycles of overload at 150% of rated current at a power factor of.75. |
| Terminal Accommodation | 15A #14 AWG |
| Terminal Identification | Terminals identified in accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability | UL 94 VO for Receptacles and Inlets. HB or better for Plugs and Connectors. |
| Operating Temperatures | Maximum Continuous 75 C Minimum -40 C (w/o impact) |
| Listings | UL |
| UPC Number | 783585237602 |
| Weight in LBs | 0.25 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read more
| Brand | Drillco |
| Model | 7E41L2SC |
| Brand | Pramet |
| Model | SFCN 42EFFR:H10 |
| Brand | Hammond Power Solutions |
| Model | FS750ACP |
| Brand | Dichtomatik |
| Model | 75008025 |
| Brand | NAE |
| Model | NBS-BG-3 |
| Brand | LS Electric |
| Model | 1389005700 |
| Brand | Cutler Hammer |
| Model | 10250TA52 |
| Brand | Bando |
| Model | 7M1150 |
SKU: 5018609
Thank you for carrying hubble and wiremold
With Hubble I am able to meet UL a smaller conduit for four #6 THHN wires than if I used Wiremold. The Hubble version is hard to obtain because Wiremold dominates this sector.
Read moreSKU: 1100550
Not bad
Unfortunately the mounting holes for this receptacle did not match the Arlington DBVS2C-1 Low Profile IN BOX Electrical Box. Otherwise it is a nice product.
Read moreSKU: 5020985
Hubble floor socket
Nice low profile. Access door is tight...needs a small tool to open. Installation was easy
Read moreItem must be unused.
Item must be in it's original package.
Restocking, shipping and handling fees may apply to any return with this manufacturer.
For more information please consult https://www.mrosupply.com/page/returnwarranty-policy/